Bituminous mastic on water for waterproofing and gluing heat-insulating boards ADW Izoplast W-KL, 22 kg
Bituminous mastic on water for waterproofing and gluing heat-insulating boards ADW Izoplast W-KL, 22 kg
Water-based bitumen-rubber mastic for creating lightweight, seamless waterproofing coatings and gluing foam, expanded polystyrene boards, 20 kg
Izoplast W-KL - bitumen-rubber mastic for gluing plates made of foam plastic, polystyrene foam and mineral insulation to concrete, brick, plastered surfaces on a water basis. To create seamless waterproofing coatings.
Scope:
- For gluing rigid heat-insulating boards made of polystyrene foam EPS or XPS
- To create seamless, thick-layer elastic and moisture-resistant coatings, both on horizontal and vertical surfaces
- To create waterproofing resistant to aggressive weather conditions
Advantages:
- Ready for use
- Contains no solvents
- Creates a seamless insulating layer
- It has high adhesive properties to mineral surfaces
- Seamless waterproofing of vertical and horizontal surfaces
The composition is a water-based bitumen-rubber emulsion
Color - Black
Packaging - 20 kg bucket.
Drying time - ≤ 6 hours
The interval between applying layers is 3 hours
Consumption (waterproofing) - 0.6 - 1.0 kg / m2
Consumption (gluing of XPS plates) - 0.8 - 1.2 kg / m2
Waterproof after - 6 hours
Application temperature from - 5°C to 25°C
Remaining dry mass - 75%
Instructions for use:
Mix before use. The surface should be smooth, free of dust and dirt. The concrete surface must be primed with IZOPLAST DYSPERBENT, or, if necessary, apply the necessary waterproofing layer. To use as a waterproofing layer, apply the thoroughly mixed mass of Izoplast W-KL to the surface with a brush, spatula or roofing brush. For gluing plates made of foam or expanded polystyrene, Izoplast W-KL is applied to the plate in strips 4 cm wide and 1.5 to 5 mm thick around the perimeter with an interval of 30 cm, or 20 points with a diameter of 5-10 cm per 1 m2.
Application Notes/Restrictions:
Observe the safety and health regulations during the work. Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor. Work with IZOPLAST W-KL should be carried out in windless weather without precipitation at ambient temperatures from 5 ° C to 25 ° C.
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 0406 7967)
(Recipient: Fedchenko Svitlana Serhiivna, Privatbank 4246 0010 3027 1724) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924
