Polymer-acrylic membrane Izoplast FH Special 4 kg
Polymer-acrylic membrane Izoplast FH Special 4 kg
Acrylic waterproofing membrane, which is used indoors with high humidity for tile materials (4 kg)
Izoplast FH Special is an acrylic waterproofing membrane based on the aqueous dispersion of polymers. Waterproofing inside rooms with high humidity for tile materials.
Advantages:
- One-component material, ready for use
- Does not contain solvents
- Creates a protective membrane on the application surface
Izoplast FH Special is a water–based acrylic waterproofing membrane for waterproofing indoors with high humidity for tile materials
Application:
- Suitable for all mineral substrates (concrete, plaster, aerated concrete, brick)
- Suitable for plasterboard and OSB boards
- It can be used in combination with thermal insulation materials
- To create a moisture-proof layer for tile materials
- To create waterproofing before laying floor coverings (wood, plastic, linoleum)
Instructions for use:
The surface must be smooth, free of dust, dirt, oils and other substances. Before application, the surface must be primed with Izoplast E Nano Power. Mix before use.
The product can be applied using a pneumatic sprayer, a roofing brush, a brush or a spatula in two or three layers. Apply the first layer by carefully rubbing into the base. Apply the layers perpendicular to each other after the previous layer has completely dried (3-4 hours at a temperature of 20 ° C).
Application Notes/Restrictions:
Observe the safety and health regulations during the work. Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.
Composition |
Acrylic waterproofing membrane based on the aqueous dispersion of polymers |
Colour |
Blue |
Packaging |
Bucket 4 kg |
Dry mass residue |
65 % |
The interval between the application of layers |
3-4 hours |
Consumption (waterproofing) |
1-1.4 kg/m2 |
Waterproof through |
12 hours |
Application temperature |
from 5 °C to 25 °C |
Composition |
Acrylic waterproofing membrane based on the aqueous dispersion of polymers |
Colour |
Blue |
Packaging |
Bucket 4 kg |
Dry mass residue |
65 % |
The interval between the application of layers |
3-4 hours |
Consumption (waterproofing) |
1-1.4 kg/m2 |
Waterproof through |
12 hours |
Application temperature |
from +5 °C to +25 °C |
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924