Modern construction requires uncompromising solutions in the field of protecting buildings from moisture. Even the strongest concrete is destroyed under the constant influence of groundwater, freezing cycles and chemically aggressive compounds. The Polish line of professional bitumen waterproofing ADW Izoplast is a benchmark for reliability on the European market, offering a systematic approach to protecting buildings from the basement to the roof.
Our company is the official importer of ADW Izoplast products to Ukraine, so we will reveal the philosophy of the Izoplast brand, the classification of its products, and the practical nuances of their application.
Brand Philosophy: Why ADW Izoplast?
ADW products combine the classic waterproofing properties of bitumen with innovative chemical additives - rubber (SBS polymers), mineral fillers, and aluminum powder.
The main advantages of the Izoplast line:
1. Elasticity and "shape memory": Thanks to the addition of rubber, the coating does not crack at low temperatures and retains its integrity in the event of microcracks in the concrete.
2. High-level adhesion: The materials penetrate deep into the pores of mineral substrates, creating a single monolithic barrier.
3. Environmental diversification: The range includes both classic mixtures based on organic solvents for difficult conditions and advanced water emulsions for safe indoor work.
Izoplast Line Architecture: From Primer to Finish
The success of waterproofing depends on comprehensiveness. The Izoplast line is designed so that each product fulfills its specific role in the protection system.
1. Preparation stage: Professional primers (Primers)
Without a quality primer, any mastic can peel off over time. Izoplast primers bind dust residues and prepare the base.
Izoplast R: Highly penetrating bitumen-rubber primer based on organic solvent. Ideal for deep impregnation of concrete, brick and metal before applying surfacing or coating materials.
Izoplast RW: An innovative water-soluble analogue. The main advantage is the complete absence of a pungent odor, which allows it to be used in closed semi-basement rooms or residential areas.
2. Protection stage: Coating waterproofing
Izoplast B: Classic bitumen-rubber mastic (solvent-based). Creates a dense, elastic black coating. Indispensable for protecting foundations, retaining walls, concrete rings and underground communications from capillary moisture and light hydrostatic pressure.
Izoplast Dysperbent: Water-based dispersion bitumen-rubber mastic. Its uniqueness lies in the fact that it can be applied to slightly damp (but not wet) surfaces. Does not destroy expanded polystyrene (EPS/XPS), which makes it ideal for combined "waterproofing + insulation" systems.
Izoplast 2K-W: Two-component thick-layer mastic (bitumen-polymer emulsion + cement powder). This is the “heavy artillery” of the line. Thanks to its rapid chemical hardening, it forms a thick elastic layer that can withstand high groundwater pressure and is used for tanks, swimming pools and deep foundations.
3. Fixation and renovation stage: Adhesives and special compounds
Izoplast Mega-Tex: Multifunctional plastic mastic. Used for bonding roofing felt, as well as insulated facade or foundation boards (XPS) to bitumen insulation. In addition, Mega-Tex is excellent for express repairs of cracks and joints.
Izoplast Silver: Bitumen-aluminum decorative and protective mastic. Solar ultraviolet is the main enemy of bitumen. Izoplast Silver contains aluminum flakes, which after drying form a silver layer that reflects UV rays and infrared radiation, extending the service life of the roof many times over.
Technological map of Izoplast systems application
To ensure that waterproofing lasts for decades, it is important to follow a clear sequence of steps. Let's consider the classic algorithm for protecting a deep foundation:
Concrete base => Primer: Izoplast R or RW (Dedusting, adhesion) => 1st layer of mastic: Izoplast B / Dysperbent => 2nd layer of mastic: Izoplast B / Dysperbent (Creating a seamless layer) => Mega-Tex glue + XPS insulation (Protection against freezing and mechanical damage)
1. Revision and rehabilitation of the base: Concrete must be strong, without "milk", large cavities and sharp protrusions. All defects are repaired in advance with cement mixtures.
2. Creating an adhesion bridge: Primer is applied. Drying time varies from 2 to 6 hours depending on weather conditions.
Layer-by-layer application: Coating mastics are applied in at least two layers. The direction of movement of the roller or brush of the second layer should be perpendicular to the first (the "cross-over" method) to eliminate the appearance of unpainted areas.
3. Technological pause: The next layer is applied only after the previous one has completely dried (controlled by a peel test).
4. Backfilling: Before backfilling the soil, the waterproofing membrane must be protected with a profiled spike membrane or XPS boards to avoid damage to the material by stones or construction debris.
The ADW Izoplast line is a balanced ecosystem where each material enhances the effect of the other. The correct selection of Izoplast products allows you to solve any moisture protection problem: from quickly patching an old roof to creating a reliable hydrobarrier for underground parking in conditions of high groundwater levels.
Products from this article
