Lubricant for forms and formwork ZAP-11 summer, 20 l.
Lubricant for forms and formwork ZAP-11 summer, 20 l.
Grease for molds and forms for the production of concrete products and use in monolithic construction.
Grease for molds and formwork ZAP-10 is used in industry in the production of concrete products, as well as in monolithic construction. Its composition provides excellent separation properties and anti-corrosion protection. ZAP-10 does not have an aggressive effect on varnish, plywood, plastics and metal, has performed well on vertical and horizontal surfaces of molds, does not drain under the influence of vibration and concrete mixture. The concrete surface of the product without unnecessary pretreatment is ready for the application of paint, plaster or adhesives. The use of ZAP-10 can significantly improve the quality of products made of concrete, foam concrete and aerated concrete, can be used in conditions of technological steaming at high temperatures up to 80C, is used ready-made:
Main Features:
- economical material consumption
- versatility of application of lubricants for forms and formwork made of metal, plywood, plastic, plastic
- it holds well on the surface of the molds during all technological operations
- ensures an uninterrupted production process
- completely eliminates the adhesion of the surface of the concrete product to the mold
- does not spoil the appearance of products, suitable for white architectural concrete
- does not affect the timing and intensity of concrete hardening
- protects metal from corrosion
- preserves wood
Features of formwork lubricant:
Method of application:
Lubricant can be applied using a roller, brush or brush.
Lubricant for forms and formwork is ready for use, applied in an even layer over the entire surface of the form.
Consumption of working solution:
On a wooden surface: 1 liter per 20-40 m²,
On a plastic or metal surface: 1 liter per 65-80 m².
Characteristics:
Composition: a modified mixture of oils without solvents
Color: from light to dark brown
Consistency: liquid
Density: at 20°C, g/cm: 0.890
Application temperature: from +5°С to +80°С
Mode of action: physical and chemical
Мастило для опалубки (20л): хочете досягти відмінних результатів при виробництві бетонних виробів або в монолітному будівництві? Тоді вам знадобиться наша мастило для форм і опалубок . Мастило-ідеальне рішення для використання в промисловості завдяки своїм відмінним розділовим властивостям і антикорозійного захисту. Ця змазка не робить агресивного впливу на лак, фанеру, пластмаси і метал, тому може бути використана безпечно на різних поверхнях форм. Одна з головних переваг - її надійність при різних технологічних операціях. Вона надійно утримується на поверхні форм, не стікає під дією вібрації і бетонної суміші. Це означає, що ви можете бути впевнені в безперебійному процесі виробництва і якості виробів з бетону, пінобетону і газобетону. Ще одна перевага-вона не тільки не псує зовнішній вигляд виробів, але і робить їх готовими для нанесення лакофарбового покриття, штукатурки або клеючих матеріалів. Таким чином, ви економите час на попередній обробці і покращуєте якість кінцевих виробів. Наша мастило також забезпечує захист металу від корозії і зберігає деревину. Ви можете бути впевнені в тому, що ваша опалубка і форми будуть довго служити вам без пошкоджень. Використання мастила-це не тільки економічна витрата матеріалу, але і універсальність застосування. Ви можете використовувати її на формах і опалубках, виготовлених з металу, фанери, пластиків або пластику. Вона підходить для різних видів поверхонь і не впливає на терміни і інтенсивність твердіння бетону.Мастило для опалубки - ваш надійний помічник у виробництві бетонних виробів. Спробуйте нашу мастило вже сьогодні і поліпшите якість своїх продуктів!
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924