Antifreeze additive for concrete NITCAL S 45, canister 5 l
Antifreeze additive for concrete NITCAL S 45, canister 5 l
Antifreeze additive at negative air temperatures up to - 25 ° C
NITSAL S45 antifreeze plasticizer is designed to regulate the properties of all ready-to-use types of concrete (reinforced and non-reinforced), mortar mixes and dry building mixes. It is used in monolithic construction for screeds, masonry and other types of construction work at low and subzero temperatures from 5 ° C to -25 ° C. Prevents the appearance of efflorescence at the stage of operation. Reduces the crystallization temperature of water. Makes it possible to obtain the minimum required early strength of 5 MPa. Increases the final strength of finished concrete products. Provides high frost resistance. A universal chlorine-free additive without changing the consistency reduces the water content of the batch to 10%. Accelerates the hydration reaction of cement.Accelerates the setting and hardening of concrete, ensuring the mobility of the concrete mixture. It is used for the preparation of concretes with a wide range of applications. Helps to improve the operational properties of the initial composition.
The main properties of the additive:
- creates high-density and waterproof concrete
- prevents the development of corrosion due to the high concentration of chlorides in the composition of the superplasticizer
- concrete sets and hardens quickly
- cement becomes more durable
- do-25C is used as an antifreeze additive
- significantly compacts concrete
- the pores of concrete are clogged much faster, preventing the fragility and destruction of concrete
Estimated concrete hardening temperature | % of additive input by weight of cement |
Special properties that additionally appear at the specified dosage,
in addition to antifreeze
|
from 5°C to -10°C | 1,0 | Accelerated strength gain, reduced cracking |
from -10°C to -15°C | 1,5 | Accelerated strength gain, formation of a "healthy" concrete structure |
from -15°C to -20°C | 2,5 | Accelerated strength gain, corrosion inhibitor, reduction of salinity |
-20°C to -25°C | 3,5 | Accelerated strength set, rebar corrosion inhibitor, prolonged strength set |
The additive is a universal tool designed to improve the characteristics of the concrete mixture. Here are some of the main properties and benefits of this supplement:
- Reduction of water content: The additive reduces the water content in the concrete mix by up to 10%. This can be useful for saving resources, reducing the weight of concrete and improving its characteristics.
- Acceleration of setting and hardening: accelerates the processes of setting and hardening of concrete, which can be useful in construction, where it is necessary to quickly achieve certain strength characteristics.
- Increasing density and water resistance: The additive helps to increase the density of finished products and improve their water resistance, which makes concrete more durable and resistant to moisture.
- Reduction of water crystallization temperature: This property can be useful in low temperature conditions, as it helps to prevent damage to concrete during freezing and thawing.
- Increased strength: Helps to achieve the minimum required early strength (5 MPa) and increase the final strength of finished products, which is important for construction projects.
- Frost resistance: The additive provides high frost resistance of concrete, which is important in cold climatic conditions.
- Prevention of efflorescence: The additive helps to prevent the appearance of efflorescence (salts) at the stage of operation of concrete structures.
- Acceleration of the hardening process in summer: In summer it can be used to accelerate the hardening process of concrete.
For concreting at low temperatures using NITCAL S 45 additives, certain conditions and dosage rules must be observed:
- Preparation of the base: Make sure that the base on which the concrete will be poured is not frozen. A frozen base can negatively affect the quality of concrete.
- Introduction of NITCAL S 45: The additive NITCAL S 45 must be introduced into the concrete mix simultaneously with other components such as cement, aggregate, water, plasticizer/superplasticizer. This will ensure an even distribution of the additive in the mixture. The mixing process in the concrete mixer should last from 1 to 5 minutes until the mixture becomes homogeneous.
- NITCAL Dosage: The dosage of NITCAL S 45 depends on the specific purposes of concreting and the required characteristics of concrete. Usually, NITCAL S 45 is used in a dosage from 0.2% to 1.2% by weight of cement. Here's how different dosages can affect concrete:
- The dosage of 0.2-1.2% by weight of cement: Leads to an acceleration of concrete setting at normal temperatures (20 ° C) and an increase in early strength, usually after 6-8 hours. This use of NITCAL S 45 increases the strength in the early stages and also helps to accelerate the hardening process.
- Dosage 1-2% by weight of cement: Used for long-term increase in the strength characteristics of concrete.
- Dosage 0.5-1% by weight of cement: Provides the best water resistance of concrete, intensifies the strength set and increases the final strength of concrete products by 20-30%.
The correct dosage of the NITCAL S 45 additive in accordance with the project requirements and climatic conditions can help achieve the necessary characteristics of concrete at low temperatures and ensure successful concreting.
Як бетонувати із добавкою в умовах низьких температур?
При виконанні бетонних робіт з укладання бетонних промислових підлог в умовах низьких температур (нижче +5ºC), необхідно дотримуватися таких умов:
1. Підстава, на яку планується заливання, не повинна бути промерзлою.
2. NITCAL S 45 вводиться в бетонну суміш одночасно з іншими компонентами: цемент, заповнювач, вода, пластифікатор/суперпластифікатор. Перемішувати в бетонозмішувачі (1÷5 хв) до досягнення однорідності суміші
Як дозувати добавку NITCAL?
NITCAL у дозуванні 0, 2 -1, 2% від маси цементу діє як прискорювач термінів схоплювання при 20ºС і таким чином підвищує міцність на ранній стадії (наприклад, через 6-8 годин).
Внаслідок перетворення невеликої кількості амонію в Нітраті Кальцію технічної якості в амін в процесі реакції з епоксидом, відбувається перетворення Нітрату Кальцію з чистого прискорювача термінів схоплювання ще й на прискорювач твердіння.
При великих дозах (1-2%) вводиться для довгострокового підвищення характеристик міцності бетону.
У дозуванні 0,5 – 1 % від маси цементу забезпечує найкращу водонепроникність бетону, інтенсифікує набір міцності та підвищує кінцеву міцність на 20 – 30 %.
Протиморозна добавка NITCAL S45: Забезпечте довговічність своїх будівельних робіт за допомогою протиморозної добавки NITCAL S45 від Protex. Цей потужний пластифікатор розроблений спеціально для використання в різних видах бетону, розчинних сумішах та будівельних сумішах. Однією з ключових переваг NITCAL S45 є його здатність регулювати властивості бетону за низьких та мінусових температур від 5 °C до -25 °C, що робить його ідеальним вибором для монолітного будівництва та інших будівельних робіт. Ця добавка запобігає утворенню висолів та знижує температуру кристалізації води, забезпечуючи мінімально необхідну ранню міцність 5 МПа. NITCAL S45 також збільшує кінцеву міцність готових бетонних виробів та забезпечує високу морозостійкість. Завдяки універсальній безхлорній формулі ця добавка зберігає консистенцію бетонної суміші, при цьому знижуючи вміст води замісу до 10%. Вона також прискорює реакцію гідратації цементу та схоплювання бетону, забезпечуючи рухливість суміші. NITCAL S45 - ідеальний вибір для виготовлення бетонів з широким спектром застосування. Ця добавка підвищує експлуатаційні властивості бетону, роблячи його високощільним, водонепроникним та стійким до корозії. Бетон, укріплений цією добавкою, швидко схоплюється і стає міцнішим. Крім того, він ефективно ущільнює бетон, закупорює пори, запобігаючи крихкості та руйнуванню. Виберіть протиморозну добавку NITCAL S45 від Protex та довірте свої будівельні роботи надійному та вдосконаленому продукту. Ваш бетон буде міцним, довговічним і відмінно впорається з будь-якими умовами.
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924