Sealant one-component acrylic window Profflex A for external use, white, 600 ml

  1. Protex
  2. Adhesives and sealants
  3. Sealant one-component acrylic window Profflex A for external use, white, 600 ml

Sealant one-component acrylic window Profflex A for external use, white, 600 ml

Tenax Profflex A single-component acrylate sealant for external use. Packing of 600 ml. White color.

156,00
uah
x
шт.
=
156,00 uah
Svetlana Fedchenko
156

PROFFLEX A is a one–component acrylate sealant with high vapor permeability. The sealant is designed to perform the outer layer of the mounting seam in accordance with DSTU-N B V.2.6-146:2010 with an allowable deformation of the mounting seam of no more than 15% for sealing the outer contour of window, door and balcony structures.High-quality acrylic sealant PROFFLEX A has high vapor-permeable properties, and is designed for sealing slopes on windows, doors, and balcony blocks, from the outside,

  • Color - White
  • Type - Single-Component
  • Water Resistance - Moisture Resistant
  • Density - 1608 kg/m3
  • Consumption - 120 g/m.p.
  • Volume - 600 ml. 
  • The country of origin of the product is Latvia
  • Warranty - 12 months

Scope of application:

  • Sealing of plastic, aluminum and wooden frames
  • Sealing of door frames and window openings

Consistency - Thixotropic paste
The base is Polyacrylate
Solidification - Evaporation of water
Vapor permeability resistance, (m2·h·Pa)/mg, - no more than 0,23
The formation time of the surface film, g. -1 hour (at 23 ° C and normal humidity)
Curing time at a layer thickness of 3 mm. - 48 hours (at 23 ° C and normal humidity)*
Density, not less than kg/m - 31608 kg/m3
The recommended application temperature range is from 5 °C to 35 °, (the minimum ambient temperature during application is up to -20 °C and relative humidity is not more than 90%). The minimum temperature of the product for application is -13 °C
Operating temperature range - From – 400C to 800C
Adhesive strength, MPa, not less:
- PVC - 0.22
- tree - 0.43
- metal - 0.24
- concrete - 0.65
Water resistance at a pressure of 600 Pa, hours, - at least 24 hours
Yield strength, mm by 2 mm thickness, - no more than 0
The limit of adhesion strength, MPa, is not less than 1.0
Resistance to deformation, %, - not less than 15
Elongation at the moment of rupture % - not less than 364%
Color - white
Stability during freezing/defrosting - 10 cycles
The projected service life of conditional years is at least 20
* With a decrease in temperature or an increase in humidity, the time increases

PROFFLEX A – однокомпонентный акрилатный герметик с высокой паропроницаемостью. Герметик предназначен для выполнения наружного слоя монтажного шва в соответствии с ДСТУ-Н Б В.2.6-146:2010, с допустимой деформацией монтажного шва не более 15%, для герметизации наружного контура оконных, дверных и балконных конструкций

Преимущества:

  • Высокая паропроницаемость
  • Очень хорошая адгезия к большинству строительных материалов
  • Обеспечивает диффузию водяного пара изнутри наружу и защищает от дождя
  • Защищает от воздействия УФ и ветра
  • Готов к применению
  • Устойчивость к деформациям
  • Долговечность
  • Возможность применения при отрицательной температуре
  • Возможная поверхностная окраска
  • благодаря высокой тиксотропности герметик можно наносить на горизонтальные и вертикальные, наклонные поверхности
  • Внешний вид – паста

Related materials

© "Protex-S" LLC2021 | Website created by MD Design