Sealant based on MS polymer Stoneflex Industry MS 530 600 ml
Sealant based on MS polymer Stoneflex Industry MS 530 600 ml
One-component adhesive-sealant based on MS-Polymer for gluing a warm base profile and gluing EPDM membranes
Dimensions (WxHxD): 30х30х30 Weight: 10000 kg
One-component adhesive-sealant based on MS-Polymer for gluing a warm base profile and gluing EPDM membranes
Scope of application
- Sealing of vertical and horizontal seams with a maximum deformation of ± 25%.
- Sealing of facade structures made of concrete.
- Treatment of plinths, panels, slabs made of synthetic materials, glaze, terracotta, wood, metals and other building surfaces (brick, concrete, plaster, plaster).
- Sealing of joints of galvanized silos with concrete foundations.
- Sealing of deformation seams of transport galleries of elevators.
- Sealing the locks of sandwich panels.
- Joints around doors, windows, window sills and balustrades.
- Bonding of EPDM membranes.
- Filling cracks in concrete, wood, plaster and stone structures.
Properties
- Can be used at low temperatures.
- Suitable for painting after film formation.
- Excellent mechanical properties.
- High resistance to UV radiation.
- Neutral, does not cause corrosion on metals.
- Creates a durable, elastic seam.
- Chemically neutral and odorless.
- Does not require a primer on most surfaces.
Technical characteristics
- Appearance: Gray, white
- Density (ISO 2811-1): 1.5 g/ml
- Film formation time: 20-40 min.
- Working time: 5-10 minutes.
- Curing speed: 2-3 mm/24 hours.
- Resistance to dripping from vertical surfaces: 0-3 mm (ISO 7390)
- Modulus of elasticity at 100% elongation: 0.4 MPa
- Elongation at break (ISO 8339): ≥ 700%
- Ability to move: ± 25%
- Application temperature: -5°C to +50°C
- Operating temperature: -40°C to +90°C
Surface preparation
The surfaces must be clean, dry and strong. Clean the joints from dust, cement residues, grease and other contaminants that can reduce adhesion. In winter, clear surfaces of snow and ice. For degreasing, use Stoneflex Industry Foam Cleaner.
Application
After preparing the surface, install the boundary cord to the required depth. If necessary, apply Stoneflex Industry MS Primer. Use the gun to spread the sealant evenly into the seam, ensuring tight contact with the sides of the seam. Avoid the formation of air cavities. If necessary, use protective tape to obtain neat joint lines.
Transportation and storage
Store up to 15 months in a dry place at a temperature from 0°C to +25°C. It can be transported for three weeks at a temperature not lower than -30°C. Keep the product at 23°C for 24 hours before use.
Notes / limitations
- Do not use for permanent immersion under water.
- Not suitable for aquariums and terrariums.
- Do not use on PP or PE surfaces (no adhesion).
- Do not paint with paints based on alkyd resins.
- Appearance: Gray, white
- Density (ISO 2811-1): 1.5 g/ml
- Film formation time: 20-40 minutes.
- Working time: 5-10 minutes.
- Curing speed: 2-3 mm/24 hours.
- Resistance to dripping from vertical surfaces: 0-3 mm (ISO 7390)
- Modulus of elasticity at 100% elongation: 0.4 MPa
- Elongation at break (ISO 8339): ≥ 700%
- Ability to move: ± 25%
- Application temperature: -5°C to +50°C
- Operating temperature: -40°C to +90°C
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924