Product code:  0081 Producer: Protex (Україна)

Repair hydraulic key for expansion joints ND-R 320, PVC, bay 20 m, blue

15200 Product code:0081 Producer: Protex (Україна)

Repair hydraulic key for expansion joints ND-R 320, PVC, bay 20 m, blue

Repair hydraulic key for deformation seams

15200 uah / roll

+38 067 414 61 38
0 800-400-212

ND-R 320 hydro-shponka is used for waterproofing expansion joints when connecting to existing concrete and metal structures. It is used in the monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. the repair hydraulic key is attached to the existing structure, the free part of the hydraulic key is unfastened to the reinforcing frame of the structure, immediately before pouring concrete. They are made of plasticized polyvinyl chloride PVC-p.

  • for sealing expansion joints between the finished reinforced concrete or metal structure and the poured structure
  • a metal strip is used for reliable fixing of hydro-pins, which are fixed on the outside of hydro-pins with the help of dowels
  • the elasticity of the material allows you to clearly install the hydraulic key in the design position
  • the presence of ribs on the locking plane and anchors protects the penetration of moisture inside the structure
  • it is used in locations of deformation joints of monolithic reinforced concrete structures
  • in particularly important structures, it is supplemented with a U-shaped repair hydraulic key of the PO series
  • Delivered in rolls of 20 m.p.

Material: plasticized polyvinyl chloride (PVC-p)
Color: Blue
Packaging: rolls of 20 m.
Roll length deviation, m: no more than ± 0.5
Dimensional deviations: according to KD
Shore hardness, A: 70 ± 5
Density, g / cm3: ≈ 1.4
Tensile strength, MPa: ≥10 (DIN 53455)
Elongation at break,%: ≥ 275
Temperature resistance, ° C: from -35 ° C to 70 ° C
Chemical resistance:

- from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and acids of low concentration, mineral oils.

UV resistance: not stable
Service life: 25 years

Hydroshponka ND - r 320 is an ideal solution for waterproofing expansion joints when connecting to concrete and metal structures. This product is necessary in the monolithic construction of buildings, foundations, underground parking lots, tunnels, canals and other objects. Our hydraulic key is easily attached to the existing structure, and the free part is unfastened to the reinforcing frame before pouring concrete. The manufacturing material is thermoplastic elastomer or plasticized polyvinyl chloride PVC. The advantages of using our hydraulic key include: - sealing of expansion joints between the finished structure and the poured concrete structure - reliable fixation with the help of a metal strip fixed on the outside of the hydraulic key - the elasticity of the material, which allows you to install the hydraulic key in the correct position - Ribs on the locking surface and anchors that prevent penetration of moisture inside the structure - applicability in places where deformation joints of monolithic reinforced concrete structures are located - important structures can be supplemented with the help of U-shaped repair hydro-shponka of the Hydro-shponka PROTEKS Hydro-shponka ND-r 320 rolls of 20 meters long. Trust the reliability and quality of our products!

Гідрошпонка НД - Р 320-ідеальне рішення для герметизації деформаційних швів між існуючими бетонними і металевими конструкціями. Наш продукт гарантує надійний захист від проникнення вологи і забезпечує бездоганну фіксацію в проектне положення завдяки своїй еластичності. Площина замикання з ребрами і анкери оптимально запобігають проникненню вологи всередину конструкції. Гідрошпонка НД-Р 320 ідеально підходить для місць розташування деформаційних швів в будівлях, фундаментах, підземних паркінгах, тунелях, каналах і багато іншого. Виробляються в рулонах довжиною 20 метрів. Забезпечте надійну гідроізоляцію своїх конструкцій з нашої чудовою гидрошпонкой НД-Р 320.

Як встановити гідрошпонку?

Гидрошпонка встановлюється в проектне положення, так, що б середина гидрошпонки перебувала по центру передбачуваного шва.
Кріплення проводиться безпосередньо до опалубки. Отвори для кріплення дозволено виробляти тільки в крайній зоні гідрошпонки, за крайнім анкером. Крок кріплення - 200-300 мм, симетрично з обох сторін. Додаткове закріплення проводиться так само до арматурного каркасу в'язальним дротом. З'єднання шпонки проводиться методом зварювання, шляхом нагрівання кінців шпонки в спеціальному кондукторі (для кожної шпонки – індивідуальний кондуктор) або за допомогою промислового фена або плоского Тена. Температура спайки близько 200 ° C (підбирається експериментальним шляхом). Для з'єднання шпонок "холодним" методом, застосовують клей, наприклад однокомпонентний пастоподібний клей на основі
силанмодифікованого полімеру Innoellast.

Гидрошпонка НД – р 320-ідеальний вибір для надійної гідроізоляції деформаційних швів при сполученні з бетонними і металевими конструкціями. Наша продукція застосовується в різних областях монолітного будівництва, включаючи фундаменти, підземні паркінги, тунелі, канали та багато іншого. Щоб забезпечити надійність і міцність, гідрошпонка закріплюється до існуючої конструкції, а вільна частина встановлюється на арматурний каркас перед заливкою бетону. Основний матеріал, який використовується у виробництві – високоякісний термопластичний еластомер ТРЕ або пластифікований полівінілхлорид ПВХ-П.це забезпечує еластичність і дозволяє точно встановити гідрошпонку в проектне положення. Ми особливо звертаємо увагу на деталі – наші гідрошпонки мають ребра на площині замикання і анкерах, які запобігають проникненню вологи всередину конструкції. Гідрошпонка НД-р 320 широко застосовується в місцях розташування деформаційних швів монолітних залізобетонних конструкцій. А для особливо важливих об'єктів ми рекомендуємо додаткове використання П-подібної ремонтної гідрошпонки з серії ПЗ. Гідрошпонки Протекс поставляються в рулонах довжиною 20 метрів, щоб забезпечити тривалий захист і зручність використання. Вибирайте гідрошпонку НД-р 320 і довіртеся надійності і неперевершеній якості продукції Protex!

Delivery methods:

  • Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
  • Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Pickup from the Protex warehouse — Free;
    (The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)

Payment methods:

  • Postpaid "Nova Poshta"
    The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order.
  • Payment by bank card (Privatbank 4246 0010 3027 1724)
    (Recipient: Fedchenko Svitlana Serhiivna)
  • Payment by details (PrivatBank)
    IBAN account: (UA103052990000026000005026855)
    Recipient: FOP Fedchenko Svitlana Serhiyivna,
    EDRPOU: 2745422924

Супутні товари