Product code:  0304 Producer: Inovgreen (Польща)

Lawn grid IG 30 black 50x50x3 cm (0.25m2)

198 Product code:0304 Producer: Inovgreen (Польща)

Lawn grid IG 30 black 50x50x3 cm (0.25m2)

Lawn and parking grid Inovgreen IG30 - the product is intended for use in areas with low traffic intensity. It is recommended for arranging driveways to garages and entrances to the private sector. Despite its low profile, the Inovgreen IG30 geogrid is a durable product and performs well when filled with soil or seeded with grass.

198 uah / шт

+38 067 414 61 38
0 800-400-212

Inovgreen IG30 geogrids

Lawn and parking grid Inovgreen IG30 is a product intended for use in areas with low traffic intensity. It is recommended for arranging driveways to garages and entrances to the private sector. Despite its low profile, the Inovgreen IG30 geogrid is a durable product and performs well when filled with soil or seeded with grass.

Characteristics:

  • Grid size: 50 cm x 50 cm, height 3 cm
  • Grid weight: 1.04 kg = 4.17 kg/m²
  • Geometric pattern: 7 x 7 cells (49 cells in one grid)
  • Biologically active surface: 86.6%
  • Temperature resistance: from -30 C to +80 C
  • Strength: up to 1000 t/m² with filler (ITB test report)
  • High Grip anti-slip surface.
  • Dual Quick Pick fastening system.
  • IG30 series for passenger cars.

Application
  • gravel and grass pitches for
    parking
  • entrances to garages
  • drainage ditches
  • garden paths
  • sports facilities
  • recreation areas
  • strengthening of slopes
  • parking spaces up to 3.5 t
  • bicycle and pedestrian paths
  • golf courses
  • camping sites
  • zoos
  • shooting ranges
  • nurseries
  • the territory of the house - drainage

Assembling

 

Stage 1. Soil preparation

After removing the top layer of soil, we fill the building site with a well-drained gravel or crushed stone mixture, compact everything. For better stabilization of this layer, the surface can be pre-lined with construction non-woven material or geotextile. The bearing layer should have a thickness of 20 cm, in the case of preparing the site for a road surface for cars, and up to 50 cm for a road surface for trucks.

Stage 2. Leveling layer

Level the surface of the previously prepared bearing layer with geotextile to ensure the separation of the layers. Then cover the area with gravel or a mixture of sand and gravel. The leveling layer should be 2-3 cm thick.

Stage 3. Laying the grids

  • INOVGREEN IG grids are laid starting from the corner of the construction site, leaving a compensator 2-5 cm from the edge. We lay the first lattices with the tongues in the direction of further laying. The next lattices are laid in the same way so that the grooves fall on the hooks of the previous lattice, connecting with a "click". We continue laying, standing on the already located lattices. Stabilize the lined surface with a vibrator or roller.

Stage 4. Filling

  • Aggregate: Fill the grates with gravel or other aggregate. It is recommended to fill the aggregate 1-2 cm above the grid surface.
  • Grass: Fill the trellis with soil, a mixture of peat and sand, or other material suitable for grass. For best results, mix the grass seed with the substrate before filling the grid. The grass must take root well before making the project area accessible to traffic.

NON-STANDARD METHODS OF SUBSTRATE PREPARATION

In special cases, when intensive use of the area covered with nets is not expected, a simplified method of land preparation can be used.
1. Remove vegetation and topsoil approximately 7 cm thick (depending on surface type).
2. If desired, cover the surface with construction fabric.
3. Pour an even layer of gravel-sand mixture with a thickness of at least 3 cm and lightly tamp it. Then the surface is lined with nets and filled as intended.

 

ALTERNATIVE TO USING INOVGREEN PARK IP GRIDS

If there is a need to quickly stabilize the green area and heavy traffic is not expected, you can use the fast and efficient method of laying INOVGREEN IP grids.
1. Turn over the panel of four pre-connected IP grids "leaves".
2. Place the first panel, pressing it slightly against the lawn. Then we add and connect by pressing another panel of lattices, turned in the same way.
3. If necessary, the grid can be easily cut to the desired shape.

Advantages

EASY INSTALLATION

The light weight of INOVGREEN products makes it easy to transport and install the parking and lawn grill. The assembly is simple and fast, the grids are connected using clips. Easy processing with a circular saw or angle cutter is possible. This allows effective and efficient gardening.

ECOLOGY

soil stabilization INOVGREEN perfectly corresponds to modern trends in ecological land use. INOVGREEN nets are completely neutral to the environment, and the surfaces lined with them are suitable for landscaping.

WATER PERMEABILITY

The surface lined with INOVGREEN grids guarantees excellent water permeability of rainwater and melted snow into the soil. The surface lined with grids does not require drainage, which significantly reduces investment and subsequent operating costs.

STRENGTH

INOVGREEN grids have high operational strength. When filled with crushed stone, gravel, earth or other similar material, they have a laboratory-confirmed durability of up to 1,000 tons/m2.

ECONOMIC BENEFITS

The Inovgreen lattice installation system is simple and fast, does not require a lot of labor (1 person can lay up to 100m2 within 1 hour). The cost of soil preparation is much lower than for concrete coatings. Using the Inovgreen system, we avoid the fees associated with draining stormwater into the sewer.

100% RECYCLING

The granules used in the production of INOVGREEN gratings are made from 100% recycled plastic. Raw materials for production are certified for the absence of contamination by heavy metals or other substances harmful to health and the environment.

HIGH QUALITY

Inovgreen products are manufactured in accordance with international standards ISO 9001: 2015. INOVGREEN gratings are produced from Polish raw materials of the highest quality from certified manufacturers. The high quality of the material used in production guarantees exceptional strength and flexibility of INOVGREEN grids.

 

Packaging

1 layer: 4 units = 1 m²

low palette: 66 layers
dimensions: 103 cm x 103 cm, height 220 cm
number of meters per pallet: 66 m2

high pallet: 80 layers
dimensions: 103 cm x 103 cm, height 260 cm
number of meters per pallet: 80 m²

Delivery methods:

  • Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
  • Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Pickup from the Protex warehouse — Free;
    (The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)

Payment methods:

  • Postpaid "Nova Poshta"
    The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order.
  • Payment by bank card (Privatbank 4246 0010 3027 1724)
    (Recipient: Fedchenko Svitlana Serhiivna)
  • Payment by details (PrivatBank)
    IBAN account: (UA103052990000026000005026855)
    Recipient: FOP Fedchenko Svitlana Serhiyivna,
    EDRPOU: 2745422924