PROTEX is a manufacturer of fasteners for fittings

PROTEX is a manufacturer of fasteners for fittings

For many years, the company "Proteks" has been one of the first enterprises to manufacture fasteners for reinforcement. The production of an important consumable for all construction organizations meets the needs of the modern market of building materials. The range of fasteners of various types is impressive and is being improved every day.

Rebar clamps are used to provide greater strength to concrete structures. Rebar clamps or rebar supports are plastic embedded consumables for securing and maintaining the position of steel reinforcement in the concrete body. Rebar clamps remain in the concrete, so they are not reusable.

Reinforcement of concrete is one of the most important stages in the process of manufacturing concrete structures. When forming a frame from reinforcement, reinforcement clamps are used, which are installed before pouring concrete on or under the reinforcement. The clamps allow you to place the reinforcement at the required distance from the base and formwork walls.

By observing important rules and norms of concreting, the strength and duration of use increase, and the safety of construction increases. Rebar clamps significantly simplify the concreting process, maintain the uniform position of the reinforcing cage, create a protective layer, provide the required thickness of the protective layer, have anti-corrosion properties, prevent the ends of the reinforcement from protruding to the surface, and increase the strength of the structures being constructed.

The material for the manufacture of clamps is Secondary raw materials. Recycled plastic remains strong and in further use. After all, the same quality is required of it as of ordinary plastic. It is not subject to corrosion and easily takes any shape, is not afraid of temperature changes, remains resistant to high and low temperatures, does not deform.

The clamps are designed for reinforcement with a diameter of 8-16 millimeters. Usually, 5 to 10 clamps are used per square meter. For reliable fixation of reinforcement, it is recommended to use 5 to 10 clamps per square meter. The smaller the diameter of the reinforcement, the more clamps are used.

Fixatives produced by the company "Proteks" do not require special storage conditions. Depending on the type, they are packed in transparent plastic bags of 100, 200, 250, 500 pieces. They can be stored in a dry, clean warehouse, but avoid direct sunlight (ultraviolet).

The type and shape of the clamps are determined by their purpose and the location of the reinforcement in the monolithic structure.

Star clamps are used for the construction of vertical monoliths. The "Star" clamp is used when reinforcing vertical concrete structures - columns, pillars, walls and protects the reinforcement from displacement and contact with the formwork. The following types of this clamp are available on our website: Star 25, Star 30, Star 35, Star 40, Star 50.

The "rack " and "flooring" clamps are used for horizontal arrangement of reinforcement when arranging foundations, industrial floors, and floor slabs. Moreover, it should be taken into account that the "rack" clamps are used on a rigid base, and the "flooring" clamps are used when arranging concrete bulk floors on a crushed stone and non-solid or loose surface - sand, polystyrene, cotton wool. The "rack" clamp is produced in the following sizes: universal rack 10-15, universal rack 20-25-30, rack 30/35, rack 50/8-24. We also offer the following types of "flooring" clamps: decking 15-20, decking 25-30, decking 30-40 (lightweight), decking 30-40, decking 55-65, decking 70-80, decking 90-100.

The "cone" clamp is a plug that is fixed at both ends of the tube, forming through holes in the concrete for fastening the formwork. These clamps prevent concrete from entering the tube, tightly fitting the formwork surface. The "cone" clamp is used with a perforated PVC pipe d-25 and a PE pipe d-25. The use of "cone" clamps prevents damage to the tie screw when dismantling the formwork. The main advantage of the "cone" clamp is its reuse in the subsequent installation of the formwork.

The "zigzag" clamp-bar is used in monolithic construction when reinforcing floors and manufacturing reinforced concrete slabs, for fixing reinforcement, reinforcing mesh with a protective coating layer from 15 to 25 mm. The main advantage is that the clamps are convenient to use on a large area of pouring. They are also used when laying concrete on a spiked membrane. The "zigzag" clamp-bar withstands high loads.

Fiber concrete retainer with the addition of short polypropylene fibers, used when installing vertical and horizontal reinforcement to create a protective layer 35,40,50 mm high. These retainers are indispensable when constructing dams, weirs, hydroelectric power plant buildings, canals, reservoirs and other hydraulic structures, subway tunnels and railway tracks. They have perfect adhesion to concrete, since they have the same structure.

The company "Proteks" has a large range of materials for monolithic construction. We invite construction organizations and private developers to cooperate, because we have excellent conditions and prices from the manufacturer and constant availability of goods in stock.