Internal hydraulic dowel 320 mm PVC for expansion joints Arfen yellow, 20 meters
Internal hydraulic dowel 320 mm PVC for expansion joints Arfen yellow, 20 meters
Internal water stop PVC Water Stop Band OD 320 mm width PVC for expansion joints Arfen yellow, bay 20 meters
Waterproofing key PVC Water Stop Band VD 32/5 is used for sealing and waterproofing of movable joints in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. It is mounted directly on the formwork sheet. It is used in hydraulic structures - reservoirs, canals, dams, swimming pools, etc., as well as for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. They are made of thermoplastic elastomer TRE (EPDM) or plasticized PVC-p polyvinyl chloride.
- allows you to securely embed into a concrete structure
- the presence of ribs on the locking plane prevents the penetration of moisture into the structure
- the presence of a deformable area allows you to perceive deformations of reinforced concrete structures without breaking the tightness
- it is used for sealing between two concrete structures
- in particularly important constructions, it is supplemented with an internal hydraulic gasket
- it can be used in structures with special requirements to ensure tightness
- withstands high water pressure inside and outside
- suitable for all kinds of designs
- the hydraulic shponka is supplied in rolls of 20 m.p.
Material | Plasticized polyvinyl chloride (PVC-n) |
Color | Yellow |
Packaging | Rolls of 20 m. p. |
Roll length deviation, m, no more | ± 0.5 |
Size deviation | According to KD |
Shore hardness, A | 70 ± 5 |
Density, g / cm3 | ≈ 1.4 |
Tensile strength, MPa | ≥10 (DIN 53455) |
Elongation at break, % | ≥ 275 |
Heat resistance, ° C | from -35 ° C to 70 ° C |
Chemical resistance | - from constant exposure to water and sewage; - from short-term exposure to inorganic alkalis and low-concentration, mineral acids |
UV resistance | Not stable |
Term of operation | not less than 25 years |
Material: plasticized polyvinyl chloride (PVC-p)
Color: Yellow
Packaging: rolls of 20 m.
Roll length deviation, m: no more than ± 0.5
Dimensional deviations: according to KD
Shore hardness, A: 70 ± 5
Density, g / cm3: ≈ 1.4
Tensile strength, MPa: ≥10 (DIN 53455)
Elongation at break,%: ≥ 275
Temperature resistance, ° C: from -35 ° C to 70 ° C
Chemical resistance:
- from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and acids of low concentration, mineral oils.
UV resistance: not stable
Service life: 25 years
Installation procedure and rules:
- The hydraulic key is installed in the design position, so that the middle of the hydraulic key is in the center of the expected deformation seam.
- Fastening is carried out directly to the formwork.
- Holes for fastening are allowed to be made only in the extreme zone of the hydraulic dowel, behind the extreme anchor.
- The fastening step is 200-300 mm, symmetrically on both sides.
- Additional fastening is carried out in the same way to the reinforcing frame with a knitting wire.
- The spigot is connected by welding, by heating the ends of the spigot in a special conductor (for each spigot – an individual conductor) or with the help of an industrial hair dryer or a flat Tena.
- The temperature of adhesion is about 200 ° C (chosen experimentally).
- To connect the keys by the "cold" method, glue is used, for example, a one-component pasty glue based on the silane-modified InnoElast polymer.
Waterproofing key PVC Water Stop Band VD 32/5 is an irreplaceable universal tool for sealing and waterproofing movable joints in monolithic construction.
This product will add reliability and protection to your buildings, including foundations, underground parking lots, tunnels, canals and much more.
It is easily mounted on the formwork sheet, and then effectively prevents the penetration of moisture inside the structure thanks to its special surface with ribs.
Moreover, the Waterproofing dowel has an area for deformation, which perfectly adapts to possible deformations of reinforced concrete structures, while maintaining perfect tightness.
This product is also ideal for sealing between two concrete structures and can be used in even the most important and demanding projects.
The hydro-shponka can be easily embedded into the concrete structure, ensuring impermeability and tightness.
In addition, this amazing key withstands significant water pressure both inside and outside, ensuring safety and reliability even in the most extreme conditions.
It is suitable for all types of structures and perfectly copes with its duties in various hydraulic structures, including reservoirs, canals, dams, pools and much more.
PVC Water Stop Band VD 32/5 is available in rolls of 20 meters in length, which ensures maximum ease of use.
This key will become an indispensable accessory for your construction projects. Do not deny yourself all that it has to offer, and allow yourself true confidence in the durability and tightness of your structures.
How to install a hydraulic key?
- The hydraulic dowel is installed in the design position so that the middle of the hydraulic dowel is in the center of the intended seam.
- Fastening is carried out directly to the formwork.
- Holes for fastening are allowed to be made only in the extreme zone of the hydraulic dowel, behind the extreme anchor. The fastening step is 200-300 mm, symmetrically on both sides.
- Additional fastening is carried out in the same way to the reinforcing frame with a knitting wire.
- The spigot is connected by welding, by heating the ends of the spigot in a special conductor (for each spigot – an individual conductor) or with the help of an industrial hair dryer or a flat Ten.
- The temperature of adhesion is about 200 ° C (chosen experimentally).
- To connect the keys by the "cold" method, glue is used, for example, a one-component pasty glue based on
- silane-modified Innoellast polymer.
Waterproofing key PVC Water Stop Band VD 32/5 is an irreplaceable material for sealing and waterproofing movable seams during the monolithic construction of various buildings and structures.
Be it foundations, underground parking lots or canals, our key provides reliable protection against moisture penetration and guarantees the durability of the structure.
Using our waterproofing key brings pleasure and confidence, because it has a number of advantages.
Ribs on the closing plane prevent moisture from penetrating inside the structure, and the deformable area is able to cope with the deformations of reinforced concrete structures without breaking the tightness.
Our key is used not only for sealing between concrete structures, but also in hydraulic structures such as reservoirs, canals and dams.
It is also suitable for waterproofing the seams of foundations, tunnels, multi-level parking lots and other underground structures.
We manufacture our waterproofing key from a special material of plasticized polyvinyl chloride PVC-p.
Our products can withstand high water pressure both inside and outside.
It is suitable for all types of structures and can be used in special cases where high tightness is required.
The PVC Water Stop Band VD 32/5 waterproofing plug is offered in convenient 20 meter long rolls.
Do not miss the opportunity to provide reliable waterproofing for your construction project - choose our Protex Water Stop Band!
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924