Perforated TEP Hydroflex tape, width 400 mm, thickness 1 mm
Perforated TEP Hydroflex tape, width 400 mm, thickness 1 mm
For sealing deformation joints and cracks
HYDROFLEX thermoplastic tape is used for horizontal and vertical expansion joints, underground structures, basements and semi-basements, blind areas, hydraulic structures designed for wastewater treatment, tanks for drinking, household water and swimming pools, tunnels and ventilation holes, for waterproofing cold joints. The main advantages of Hydroflex thermoplastic tape are: ease of application with epoxy glue, unique chemical composition, which provides high elasticity (600%), high adhesion to dry and wet concrete. Hydroflex thermoplastic tape is not damaged by plant roots, is resistant to aggressive effects of ozone, fuel oil and oil, adapts to use in a wide temperature range. It is also possible to connect two strips by means of thermal exposure.
- high adhesion ability
- chemical resistance
- absence of solvents in the composition
- for expansion joints of floors, walls, blind areas and terraces
- waterproof and gas tightness
- adaptation to wet surfaces
- a practical consistency for application
- applied without primer
Scope of application
- Horizontal and vertical expansion joints.
- Underground structures, basements and semi-basements, blind spots.
- Hydraulic structures designed for wastewater treatment, reservoirs for drinking and household water and swimming pools.
- Tunnels and ventilation openings.
- For waterproofing cold joints.
Main advantages
- Easy to apply with epoxy glue.
- The uniqueness of the chemical composition ensures high elasticity (600%).
- High adhesion to dry and wet concrete.
- It is not damaged by plant roots.
- Resistance to aggressive effects of ozone, fuel oil and oil.
- Adaptation to use in a wide temperature range.
- The possibility of connecting two bands by means of thermal exposure.
Epoxy glue
HYDROFLEX 21 is a solvent-free epoxy two-component adhesive. Designed for fixing deformation tapes.
Purpose:
- Fixes the deformation tape
- Fasteners of reinforcement outlets and bolts
- Installation of guide machines and cranes to the base
Advantages:
- High adhesion ability
- Chemical resistance
- Absence of solvents in the composition
- It is used for expansion joints of floors, walls, blind areas and terraces
- Waterproof and gas tightness
- Adaptation to wet surfaces
- A practical consistency for application
- Applied without primer
- Multi-colored components help to monitor whether the mixture is well mixed enough.
Chemical composition: TEP (thermoelastoplast)
Color: Light gray
Shore hardness: A 80
Operating temperature: -40 / 90
Heater temperature: 270 °C
Elongation to failure: 600%
Tensile strength: N/cm >600 N/cm
Resistance to Hydraulic pressure bar: > 8 bar
Tensile strength: MPa >6 MPa
UV resistance: 7500 h
Resistance to bitumen: good
Resistance to sulfuric acid: good
Alcohol resistance: good
Resistance to detergents: good
Bay: 5 m. p.
What to pay attention to when preparing the mixture?
1. The mixture is prepared immediately before use and must be used within 30 minutes.
2. Do not leave the mixture in the container for more than 5 minutes after the end of mixing.
3. During application, the temperature of the base and the environment should be within 5 - 30°C.
The lifetime and processing time of artificial resins depends on the humidity of the base and the ambient temperature: at low temperatures, the lifetime of the finished composition increases, and vice versa, high temperatures accelerate the reaction
What is the consumption of Hydroflex - 21?
Consumption: Hydroflex 21-1.6 kg/1 sq.m. per 1 mm layer, the indicated rate of material consumption is calculated for a flat surface and a temperature of 15 to 25 °C. at lower base temperatures, consumption may increase and curing time may increase.
Delivery methods:
- Delivery by courier in Kyiv (1-3 business days, cost according to carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 business days, cost according to carrier's tariffs);
Delivery cost — according to carrier rates - Nova Poshta in Ukraine (1-3 business days, cost according to carrier tariffs);
Delivery cost — according to carrier rates - Pickup from Protex warehouse — Free;
(Warehouse address: Kyiv, Pshenichna Street, 9. The goods can be received from 9:00 to 17:00, Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + 20 UAH of the order amount. - Payment by bank card
- Payment by details
Adhesive repair two-component mixture Hydroflex 21 for sealing seams, 5 kg
Product code: 0188
Hydroshpunka PO1 Repair Hydroshpark for deformation seams, bay 20 m., Gray
Product code: 0090
