Hydroshponka PO-2/50 PVC external repair for seams, gray, 20 m.p.
Hydroshponka PO-2/50 PVC external repair for seams, gray, 20 m.p.
Repair hydra key PO-2/50 with a width of 60 mm and a height of 150 mm with an anchor length of 45 mm
U-shaped hydraulic wedge series PO
Used for sealing and waterproofing movement joints in monolithic construction of buried and underground structures when combined with existing concrete structures.
The similar shape of the hydrokey allows you to clearly install the key in the design position, using, for example, a sheet of polystyrene foam, onto which the key is "put on".
The presence of ribs on the locking plane prevents moisture from penetrating into the structure.
Advantages of using hydraulic dowels:
- used in locations of expansion joints of monolithic reinforced concrete structures when combined with an existing concrete structure; in particularly important structures it is supplemented with an internal or lower external hydraulic wedge;
- withstands slight water pressure inside and outside;
Material: plasticized polyvinyl chloride (PVC-p)
Color: Gray
Packaging: rolls of 25 m. p.
Shore hardness: A 70 ± 5 7
Density, g / cm3 ≈ 1.48
Tensile strength, MPa ≥10 (DIN 53455)
Elongation at break, % ≥ 275
Temperature resistance, °С from -35°С to 70°С 11
Chemical resistance:
- from permanent exposure to water and sewage, benzene and oils;
- from short-term exposure to inorganic alkalis and acids of low and medium concentration.
- from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and acids of low concentration, mineral oils
UV resistance: not stable
Service life: not less than 25 years
The PO-2/50 series repair hydro-pins are used for waterproofing expansion joints when connecting to existing concrete structures. It is used in monolithic construction, including foundations, underground parking lots, tunnels, canals, etc. The repair hydra key is attached to the existing concrete structure, the free part of the hydra key is unfastened to the reinforcing frame of the poured structure, immediately before pouring concrete. They are intended for sealing deformation seams between the finished reinforced concrete structure and the poured structure. The absence of fastening anchors on one side of the hydraulic key allows to hermetically glue the U-shaped hydraulic key to the finished steel structure. A metal strip is used for reliable fixing of the hydro-pin, which is fixed from the inside of the hydro-pin with the help of dowels. The U-shaped shape makes it possible to precisely install the hydraulic plug in the design position, using sheet elastic material, for example, a polystyrene plate, on which the hydraulic plug is "put on". The presence of ribs on the locking plane prevents the penetration of moisture into the structure.
- it is used in the locations of deformation seams of monolithic reinforced concrete structures
- in particularly important structures, it is supplemented with an internal or external repair hydraulic key
- delivered in bays of 25 m.p
- If lengthening is necessary and to perform spatial nodal transitions, they are welded in a conductor, with a construction hair dryer, with a flat heating element or glued together
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924