Hydroshponka P-2 for sealing and waterproofing movable joints, bay 20 m, gray
Hydroshponka P-2 for sealing and waterproofing movable joints, bay 20 m, gray
For sealing and waterproofing of movable joints in monolithic construction
The P-2 hydrosponk is used for sealing and waterproofing movable joints in monolithic construction of buried and underground structures. Hydraulic pads are used in hydraulic structures (reservoirs, canals, dams, pools, etc.), as well as for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. They are made of thermoplastic elastomer TPE (EPDM) or plasticized PVC polyvinyl chloride-P. The U-shaped shape of the hydraulic key allows you to clearly install the key in the design position, using, for example, a sheet of expanded polystyrene, on which the key is put on.
- the presence of ribs on the locking plane prevents the penetration of moisture into the structure
- it is used in the locations of deformation joints of monolithic reinforced concrete structures
- in particularly important constructions, it is supplemented with an internal or lower external hydraulic spar
- withstands small water pressure inside and outside
- suitable for all kinds of designs
- they are delivered in bays of 25 m.p.
Material: plasticized polyvinyl chloride (PVC-p)
Color: Gray
Packaging: rolls of 20 m.
Roll length deviation, m: no more than ± 0.5
Dimensional deviations: according to KD
Shore hardness, A: 70 ± 5
Density, g / cm3: ≈ 1.4
Tensile strength, MPa: ≥10 (DIN 53455)
Elongation at break,%: ≥ 275
Temperature resistance, ° C: from -35 ° C to 70 ° C
Chemical resistance:
- from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and acids of low concentration, mineral oils.
UV resistance: not stable
Service life: 25 years
Перед вами Гидрошпонка П-2 - ідеальне рішення для герметизації і гідроізоляції рухомих швів в монолітному будівництві. Незалежно від того, будуєте ви заглиблені або підземні споруди, наша гідрошпонка буде надійним захистом. Наші гідрошпонки широко застосовуються в гідротехнічних спорудах, таких як резервуари, канали, дамби і басейни. Вони також відмінно підходять для гідроізоляції швів підстав, фундаментів, тунелів та інших підземних споруд. Ми виробляємо гідрошпонки з високоякісного матеріалу - пластифікованого полівінілхлориду ПВХ-П.це гарантує їх міцність і довговічність. Крім того, наші гідрошпонки мають п-подібну форму, яка забезпечує просте і точне встановлення шпонки в потрібне положення, наприклад, за допомогою листа пінополістиролу. Наявність ребер на площині замикання виключає проникнення вологи всередину конструкції. Це особливо важливо в місцях розташування деформаційних швів монолітних залізобетонних конструкцій. Гідрошпонка П-2 здатна витримувати невеликий тиск води як всередині, так і зовні. Вона підходить для всіх видів конструкцій, забезпечуючи надійну гідроізоляцію. Наші гідрошпонки поставляються в бухтах довжиною 25 метрів. Розміри зручні для будь-якого проекту і дозволяють економити кошти і час при установці. Виберіть гідрошпонку П-2 і будьте впевнені в надійній гідроізоляції вашого будівельного проекту.
Як встановити гідрошпонку?
Гидрошпонка встановлюється в проектне положення, так, що б середина гидрошпонки перебувала по центру передбачуваного шва.
Кріплення проводиться безпосередньо до опалубки. Отвори для кріплення дозволено виробляти тільки в крайній зоні гідрошпонки, за крайнім анкером. Крок кріплення - 200-300 мм, симетрично з обох сторін. Додаткове закріплення проводиться так само до арматурного каркасу в'язальним дротом. З'єднання шпонки проводиться методом зварювання, шляхом нагрівання кінців шпонки в спеціальному кондукторі (для кожної шпонки – індивідуальний кондуктор) або за допомогою промислового фена або плоского Тена. Температура спайки близько 200 ° C (підбирається експериментальним шляхом). Для з'єднання шпонок "холодним" методом, застосовують клей, наприклад однокомпонентний пастоподібний клей на основі
силанмодифікованого полімеру Innoellast.
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924