Product code:  0077 Producer: Protex (Україна)

Waterproofing dowel ND 500/35 PVC outer blue PROTEX for expansion joints, 20 m.p.

20140 Product code:0077 Producer: Protex (Україна)

Waterproofing dowel ND 500/35 PVC outer blue PROTEX for expansion joints, 20 m.p.

Waterproofing dowel ND 500/35 PVC external blue PROTEX for expansion joints, width 500 mm, bay 20 m. p.

20140 uah / roll

+38 067 414 61 38
0 800-400-212

The ND 500/35 hydraulic gasket is used for sealing and waterproofing movable joints in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. it is mounted directly on the formwork sheet. it is used in hydraulic structures - reservoirs, canals, dams, swimming pools, etc., as well as for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. they are made of thermoplastic elastomer tre (EPDM) or plasticized PVC-p polyvinyl chloride.​

  • allows you to securely embed into a concrete structure
  • the presence of ribs on the locking plane prevents the penetration of moisture into the structure
  • the presence of a deformable area allows you to perceive deformations of reinforced concrete structures without breaking the tightness
  • it is used for sealing between two concrete structures
  • in particularly important constructions, it is supplemented with an internal hydraulic gasket
  • it can be used in structures with special requirements to ensure tightness
  • withstands high water pressure inside and outside
  • suitable for all kinds of designs
  • the hydraulic shponka is supplied in rolls of 25 m.p.

Установка внешней шпонки гидравлической серии HР AD

Material Plasticized polyvinyl chloride (PVC-n)
Color Blue
Packaging Rolls of 20 m. p.
Roll length deviation, m, no more ± 0.5
Size deviations According to KD
Shore hardness, A 70 ± 5
Density, g / cm3 ≈ 1.4
Tensile strength, MPa ≥10 (DIN 53455)
Elongation at break, % ≥ 275
Heat resistance, ° C from -35 ° C to 70 ° C
Chemical resistance - from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and low-concentration, mineral acids
UV resistance Not stable
Term of operation not less than 25 years

 

Material: plasticized polyvinyl chloride (PVC-p)
Color: Blue
Packaging: rolls of 20 m.
Roll length deviation, m: no more than ± 0.5
Dimensional deviations: according to KD
Shore hardness, A: 70 ± 5
Density, g / cm3: ≈ 1.4
Tensile strength, MPa: ≥10 (DIN 53455)
Elongation at break,%: ≥ 275
Temperature resistance, ° C: from -35 ° C to 70 ° C
Chemical resistance:

- from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and acids of low concentration, mineral oils.

UV resistance: not stable
Service life: 25 years

 

Installation procedure and rules:

  • The hydraulic key is installed in the design position, so that the middle of the hydraulic key is in the center of the expected deformation seam.
  • Fastening is carried out directly to the formwork.
  • Holes for fastening are allowed to be made only in the extreme zone of the hydraulic dowel, behind the extreme anchor.
  • The fastening step is 200-300 mm, symmetrically on both sides.
  • Additional fastening is carried out in the same way to the reinforcing frame with a knitting wire.
  • The spigot is connected by welding, by heating the ends of the spigot in a special conductor (for each spigot – an individual conductor) or with the help of an industrial hair dryer or a flat Ten.
  • The temperature of adhesion is about 200 ° C (chosen experimentally).
  • To connect the keys by the "cold" method, glue is used, for example, a one-component pasty glue based on the silane-modified InnoElast polymer.

Protex ND 500/35 blue PROTEX water plug is an indispensable tool for waterproofing and sealing movable joints in monolithic buildings, including foundations, underground parking lots, tunnels, canals and much more.

It is easily mounted on formwork sheets, providing reliable waterproofing in hydraulic structures such as reservoirs, canals, dams, pools, as well as for base seams, foundations, tunnels and multi-level parking lots.

Made of high-quality plasticized PVC-P polyvinyl chloride, our Protex ND 500/35 hydraulic plug is distinguished not only by excellent tightness, but also by the ability to effectively perceive deformations of reinforced concrete structures without impairing its functionality.

With its help, you can safely build it into a concrete structure, and the ribs on the closing plane will not allow moisture to penetrate inside.

The use of our hydraulic key promotes reliable sealing between two concrete structures and for particularly important projects it is recommended to use it together with an internal hydraulic key.

What's especially great is that our Protex ND 500/35 hydraulic plug easily withstands high water pressure both internally and externally, making it an ideal choice for structures with special requirements for sealing.

In addition, it is suitable for use in all types of structures.

Our hydraulic spigots come in convenient 20 meter rolls, ensuring you have enough material for your project.

How to install a hydraulic key?

  • The hydraulic dowel is installed in the design position so that the middle of the hydraulic dowel is in the center of the intended seam.
  • Fastening is carried out directly to the formwork.
  • Holes for fastening are allowed to be made only in the extreme zone of the hydraulic dowel, behind the extreme anchor.
  • The fastening step is 200-300 mm, symmetrically on both sides.
  • Additional fastening is carried out in the same way to the reinforcing frame with a knitting wire.
  • The spigot is connected by welding, by heating the ends of the spigot in a special conductor (for each spigot – an individual conductor) or with the help of an industrial hair dryer or a flat Ten.
  • The temperature of adhesion is about 200 ° C (chosen experimentally).
  • To connect the keys by the "cold" method, glue is used, for example, a one-component pasty glue based on
  • silane-modified Innoellast polymer.

Protex ND 500/35 PROTEX PVC waterproofing is an ideal solution for sealing and waterproofing movable joints in monolithic construction.

Thanks to its unique properties, it provides a reliable and impermeable connection between concrete structures.

The blue Protex hydraulic key has ribs on the locking plane that prevent moisture from entering the structure.

Thanks to the deformable area, it easily adapts to the deformations of reinforced concrete structures, without breaking the tightness.

The use of an external Protex hydraulic seal allows for effective sealing between two concrete structures, providing reliable protection against moisture.

In the case of particularly important structures, it can be supplemented with an internal hydraulic key to increase tightness.

Our hydraulic key is ideal for all types of structures and can be used even in structures with special requirements to ensure tightness.

It can withstand high water pressure both inside and outside.

Protex hydroshponka is supplied in rolls 20 meters long, which ensures convenience during installation.

Do not miss the opportunity to use a reliable and airtight material for waterproofing your construction projects.

Delivery methods:

  • Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
  • Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Pickup from the Protex warehouse — Free;
    (The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)

Payment methods:

  • Postpaid "Nova Poshta"
    The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order.
  • Payment by bank card (Privatbank 4246 0010 3027 1724)
    (Recipient: Fedchenko Svitlana Serhiivna)
  • Payment by details (PrivatBank)
    IBAN account: (UA103052990000026000005026855)
    Recipient: FOP Fedchenko Svitlana Serhiyivna,
    EDRPOU: 2745422924

Супутні товари