Membrane forming agent for concrete surfaces Tekno
Hardener - membrane-forming agent for concrete surfaces
Plasticizer for concrete increases the strength set at an early stage of maturation of the solution
Teknoflow Super superplasticizer is an additive for concrete mortars, improves elasticity and increases the strength of concrete.
Scope of application:
Advantages:
Instructions for use:
Add Teknoflow Super Plasticizer 0.5-2% by weight of cement to the concrete mixture and mix until a homogeneous mass is formed. Apply at ambient temperatures from 5°C to 35°C.
Recommendations for use:
Colour | Brown |
Packaging | 30 kg canister |
Application temperature | ( 5 °C) - ( 35 ° C) |
Mixing ratio | 0.5-2% by weight of cement in solution |
Density | 1.2 - 1.22 kg/l |
Chlorine content | < 0,1 % |
Alkali content | < 10 % |
Adhesion | < 1 N/mm2 |
Expiration date | 12 months in a dry environment in a closed package |
Add Teknoflow Super Plasticizer 0.5-2% by weight of cement to the concrete mixture and mix until a homogeneous mass is formed. Apply at ambient temperatures from 5°C to 35°C.
Hardener - membrane-forming agent for concrete surfaces
For reinforcement, improvement of mechanical properties and durability of concrete.
Gives concrete products protection from positive and negative water pressure.
Polyethylene film for wide use on construction sites
Polypropylene fiber to reduce the appearance of microcracks and micro-reinforcement of cement-sand solutions
Lime substitute for plaster and masonry mortars
For the production of concrete products and use in monolithic construction.
© "Protex-S" LLC2021 | Website created by MD Design