One-component polyurethane sealant Tenalux 131L, for road joints, 600 ml
Ready-to-use one-component sealant based on MS Polymer for sealing joints in horizontal structures with direct mechanical load.
Elastic one-component polyurethane sealant Tenalux 131M for seams, file-pack 600 ml.
Tenalux 131M elastic one-component polyurethane sealant for construction joints, gray color, file package 600 ml.
352 uah
x
шт.
=
TENALUX 131 M is a ready-to-use one-component sealant, developed on the basis of MS polymer (silane modified polymer) in the form of a gray thixotropic mass. It is used for sealing joints, seams and cracks on horizontal, vertical and inclined building surfaces with a maximum deformation of ± 25% under increased regular and irregular mechanical loads. It has a high level of adhesion to various surfaces of building materials, as well as good strength and deformation characteristics after polymerization.
Application:sealing of joints of industrial floors
- sealing joints of vertical and inclined construction structures
- sealing of joints in horizontal building structures
- sealing of expansion joints with a maximum deformation of ± 25% under regular and irregular mechanical loads
Appearance - Gray thixotropic mass, other colors are possible on request
Type of polymer - Single-component MS polymer, cold curing under the influence of air moisture
Packaging - Packed in tubes of laminated plastic with a capacity of 600 ml
The warranty period of storage is 12 months in unopened, complete factory packaging in dry warehouses at a temperature of no more than 30 ° C.
Sealing properties - The formation of a surface film ≈ 20 minutes at 23 ° C and a relative humidity of 50 %
Curing rate - 3 to 4 mm/day at 23 °C and relative humidity 50 %
Shrinkage - ≤ 1 %
Density - ≈ 1.5 kg/liter
Return deformation
≥ 70 % (ISO 7389)
Strength characteristics (on concrete seam samples)
It is delivered in cardboard boxes equipped with labels, one box contains 15 tubes..
GOST 21751-76
(ISO 8339)
• conditional tensile strength
≥ 1.8 MPa
≥ 1.3 MPa
• elongation at the moment of rupture
≥ 400 %
≥ 200 %
• modulus of elasticity at 100 % elongation
0.7 to 0.9 MPa
> 0.4 MPa
Shore hardness A - 40 ± 2 (ISO 868)
Application temperature range - from 1 °C to 50 °C
Operating temperature range - from – 50 °C to 70 ° C
Applicable seams (joints)
Permissible deformation - ± 25 %
Seam depth - from 5 to 20 mm
Seam width - from 10 to 40 mm
The ratio of the width to the depth of the seam is 2:1
Tenalux 131 M - готовый к применению однокомпонентный герметик на базе MSPolymer® для заделки швов в горизонтальных конструкциях с прямой механической нагрузкой. Может использоваться для герметизации швов в вертикальных и наклонных строительных конструкциях. Легко наносится вручную методом шприцевания с помощью специальных пистолетов. Отверждается в результате химической реакции с влагой воздуха. Герметик обладает отличной адгезией к большинству строительных материалов, а также хорошими прочностными и деформационными качествами после отверждения. Может применяться в жилых помещениях.
Преимущества:
- тиксотропный (не стекает в вертикальных швах)
- высокий уровень адгезии к бетонным поверхностям, металлу, дереву, пластику и стеклу
- применяется в широком диапазоне температур, сохраняя при этом хорошую эластичность
- устойчив к воздействию климатических факторов
- можно окрашивать воднодисперсионными красками
- практически не дает усадки
- экологически безопасен (может применяться в жилых помещениях)
Related materials
Two-component polyurethane sealant IPS PU 2K for seams, 12 kg
Two-component polyurethane sealant of white color for seams and cracks in vertical and inclined building structures in the absence of mechanical load with permissible deformations ± 25%, bucket 12 kg
Sealant one-component acrylic window Profflex A for external use, white, 600 ml
Tenax Profflex A single-component acrylate sealant for external use. Packing of 600 ml. White color.
Sealant one-component acrylic Tenax Profflex B for internal use, white, 600 ml.
One-component acrylic sealant Profflex B for internal use. Packing of 600 ml. White color.
Two-component polyurethane sealant Oksiplast for seams, 12 kg
Two-component polyurethane sealant of white color for seams and cracks in vertical and inclined building structures in the absence of mechanical load with permissible deformations ± 25%, bucket 12 kg
One-component polyurethane sealant Hydroflex 40FC for joints, 600 ml
HYDROFLEX 40 FC is a single–component high-modulus polyurethane sealant that gains strength under the influence of atmospheric humidity. It has excellent adhesion to concrete, metal, ceramics, wood, etc.
Sealing tape RubberElast 25x19(4.4m long)
Tape for sealing joints, joints of reinforced concrete structures
© "Protex-S" LLC2021 | Website created by MD Design