One-component acrylic sealant Profflex B for internal use. Packing of 600 ml. White color.
Profflex B is a one-component sealant with high vapor permeability on an acrylic base. The sealant is designed to seal the inner contour of window, door and balcony structures, with an allowable deformation of the mounting seam of no more than 15%.
Scope of application:
Consistency - Thixotropic paste
The base is Polyacrylate
Solidification - Evaporation of water
Vapor permeability resistance, (m2·h·Pa)/mg, - no more than 0,23
The formation time of the surface film, g. - 1 hour (at 23 ° C and normal humidity)
Curing time at a layer thickness of 3 mm. - 48 hours (at 23 ° C and normal humidity)*
Density, not less than kg/m - 31608 kg/m3
The recommended application temperature range is from 5 °C to 35 °, (the minimum ambient temperature during application is up to -20 °C and relative humidity is not more than 90%). The minimum temperature of the product for application is 13 °C
Operating temperature range - From – 400C to 800C
Adhesive strength, MPa, not less:
- PVC - 0.22
- tree - 0.43
- metal - 0.24
- concrete - 0.65
Water resistance at a pressure of 600 Pa, hours, - at least 24 hours
Yield strength, mm by 2 mm thickness, - no more than 0
The limit of adhesion strength, MPa, is not less than 1.0
Resistance to deformation, %, - not less than 15
Elongation at the moment of rupture % - not less than 364%
Color - white
Stability during freezing/defrosting - 10 cycles
The projected service life of conditional years is at least 20
* With a decrease in temperature or an increase in humidity, the time increases
PROFFLEX В – однокомпонентный акрилатный герметик с высокими пароизоляционными свойствами. Герметик предназначен для выполнения внутреннего слоя монтажного шва в соответствии с ДСТУ-Н Б В.2.6-146:2010 с допустимой деформацией монтажного шва не более 15% для герметизации внутреннего контура оконных, дверных и балконных конструкций.
Свойства:
Two-component polyurethane sealant of white color for seams and cracks in vertical and inclined building structures in the absence of mechanical load with permissible deformations ± 25%, bucket 12 kg
Tenalux 131M elastic one-component polyurethane sealant for construction joints, gray color, file package 600 ml.
Two-component polyurethane sealant of white color for seams and cracks in vertical and inclined building structures in the absence of mechanical load with permissible deformations ± 25%, bucket 12 kg
HYDROFLEX 40 FC is a single–component high-modulus polyurethane sealant that gains strength under the influence of atmospheric humidity. It has excellent adhesion to concrete, metal, ceramics, wood, etc.
Ready-to-use one-component sealant based on MS Polymer for sealing joints in horizontal structures with direct mechanical load.
Tenax Profflex A single-component acrylate sealant for external use. Packing of 600 ml. White color.
Tape for sealing joints, joints of reinforced concrete structures
© "Protex-S" LLC2021 | Website created by MD Design
