Internal hydraulic key for working seams BP 320, PVC, blue, bay 20 m
Internal hydraulic key for working seams BP 320, PVC, blue, bay 20 m
Internal hydraulic key for working seams
Hydraulic shponka BP 320 are designed for waterproofing of working (technological) joints of concrete structures between a horizontal base plate and a vertical load-bearing wall, or formed during a break in concreting. Hydroshpons are used in hydraulic structures: reservoirs, canals, dams, pools, etc., as well as for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. They are made of thermoplastic elastomer TPE (EPDM) or plasticized PVC-p polyvinyl chloride.
- it is used when concreting monolithic reinforced concrete structures is interrupted
- in particularly important constructions , it is complemented by an external hydraulic spar
- the presence of ribs on the locking plane prevents the penetration of moisture into the structure
- it can be used in structures with special requirements to ensure tightness
- withstands high water pressure inside and outside
- with ease of installation, it is suitable for all types of structures
- It is delivered in rolls of 25 m.p.
Material: plasticized polyvinyl chloride (PVC-p)
Color: Blue
Packaging: rolls of 20-25 m.
Roll length deviation, m: no more than ± 0.5
Dimensional deviations: according to KD
Shore hardness, A: 70 ± 5
Density, g / cm3: ≈ 1.4
Tensile strength, MPa: ≥10 (DIN 53455)
Elongation at break,%: ≥ 275
Temperature resistance, ° C: from -35 ° C to 70 ° C
Chemical resistance:
- from constant exposure to water and sewage;
- from short-term exposure to inorganic alkalis and acids of low concentration, mineral oils.
UV resistance: not stable
Service life: 25 years
Protex BP 320 hydro-shponka is a reliable solution for waterproofing working joints in concrete structures. It is intended for use in various hydrotechnical structures, such as reservoirs, canals, dams, pools and much more. Our water plugs are made of high-quality thermoplastic elastomer TPE (EPDM) or plasticized polyvinyl chloride PVC-p. They have unique properties that allow them to withstand high water pressure both outside and inside the structure. Protex BP 320 hydro-pins have ribs on the closing plane, which effectively prevent moisture from entering the structure. This makes them an ideal choice for special requirements where tightness is paramount. We also offer an external hydro key to provide additional protection in critical structures. Installation of hydraulic keys Protex BP 320 is simple and convenient. They are suitable for all types of structures and are supplied in convenient 25 meter long rolls. Protect your concrete structures from water with the reliable Protex BP 320 hydraulic key. Be sure of their durability and efficiency!
The unique hydraulic key BP 320 from Protex is a reliable solution for waterproofing concrete structures. Consists of thermoplastic elastomer TPE (EPDM) or plasticized polyvinyl chloride PVC-p, it provides reliable protection of working seams against moisture penetration and tightness in any conditions. This hydraulic key is ideal for hydraulic structures such as reservoirs, canals, dams, pools, as well as for foundation joints, foundations, tunnels, multi-level parking lots and other underground structures. Our product is also recommended to be used when concreting of monolithic reinforced concrete structures is interrupted, and for special requirements on tightness, an external hydraulic key is provided. The advantages of the hydraulic key BP 320 are convincing: the presence of ribs on the closing plane ensures impermeability and protection against moisture inside and outside, it can withstand high water pressure and is easily mounted in any structures. In addition, the product is supplied in rolls of 25 meters long, which simplifies the installation process. By choosing the BP 320 waterproofing plug from Protex, you get a reliable and effective waterproofing solution that will exceed your expectations. Do not miss the opportunity to ensure the reliability and durability of your structure with our unique product.
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924