Repair hydraulic for deformation seams in 2, bay of 20 m, gray
Repair hydraulic for deformation seams in 2, bay of 20 m, gray
Repair hydraulic joint for expansion joints of the PO-2 series
Repair hydraulic plugs of the PO-2 series are used for waterproofing expansion joints when combined with existing concrete structures. It is used in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. The repair hydraulic plug is fixed to the existing concrete structure, the free part of the hydraulic plug is unfastened to the reinforcing frame of the structure being poured, immediately before pouring concrete.
Made from plasticized polyvinyl chloride (PVC).
Repair waterstops of the PO-2 series are designed for sealing expansion joints between the finished reinforced concrete structure and the poured structure. The absence of fastening anchors on one side of the waterstop allows for hermetically gluing the U-shaped waterstop to the finished reinforced concrete structure. For reliable fixation of the waterstop, a metal strip is used, which is fixed from the inside of the waterstop using dowels. The U-shaped shape allows for precise installation of the waterstop in the design position, using sheet elastic material, such as a polystyrene foam plate, onto which the waterstop is “put on”. The presence of ribs on the locking plane prevents moisture from penetrating into the structure.
- used in locations of expansion joints of monolithic reinforced concrete structures
- in particularly important structures it is supplemented with an internal or external repair hydraulic wedge
- are supplied in coils of 20m.
- If necessary, lengthening and for performing spatial nodal transitions are welded in a conductor, with a construction hair dryer, flat heating element or glued together.
Material: PVC
Color : Gray
Packaging: Rolls of 20 m.p.
Shore hardness: A 70 ± 5 7
Density, g/cm³ ≈ 1.48
Tensile strength, MPa ≥10 (DIN 53455)
Elongation at break, % ≥ 275
Thermal resistance, °C from -35°C to +70°C 11
Chemical resistance:
- from constant exposure to water and wastewater;
- from short-term exposure to low-concentration inorganic alkalis and acids, mineral oils.
UV resistance: not resistant
Service life: 25 years
Delivery methods:
- Delivery by courier in Kyiv (1-3 business days, cost according to carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 business days, cost according to carrier's tariffs);
Delivery cost — according to carrier rates - Nova Poshta in Ukraine (1-3 business days, cost according to carrier tariffs);
Delivery cost — according to carrier rates - Pickup from Protex warehouse — Free;
(Warehouse address: Kyiv, Pshenichna Street, 9. The goods can be received from 9:00 to 17:00, Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + 20 UAH of the order amount. - Payment by bank card
- Payment by details
Internal hydraulic key for expansion joints VD 200, PVC, bay 20 m, blue
Product code: 0068
Hydroshpunka PO1 Repair Hydroshpark for deformation seams, bay 20 m., Gray
Product code: 0090
