Repair hydraulic key for expansion joints ND-R 500, PVC, blue, bay 20 m
Repair hydraulic key for expansion joints ND-R 500, PVC, blue, bay 20 m
Repair hydraulic wedge for expansion joints
Гідрошпонка НД-р 500 використовується для гідроізоляції деформаційних швів при сполученні з існуючими бетонними і металевими конструкціями. Застосовується в монолітному будівництві будівель, в тому числі фундаментів, підземних паркінгів, тунелів, каналів і т.д. ремонтна гидрошпонка закріплюється до існуючої конструкції, вільна частина гидрошпонки розкріплюється до арматурного каркасу заливається конструкції, безпосередньо перед заливкою бетону. Виготовляються з пластифікованого полівінілхлориду ПВХ-п.
- для герметизації деформаційних швів між готовою ж / б або металевою конструкцією і заливається конструкцією
- для надійної фіксації гидрошпонки застосовують металеву смугу, яку закріплюють зовні гидрошпонки за допомогою дюбелів
- еластичність матеріалу дозволяє чітко встановлювати гідрошпонку в проектне положення
- наявність ребер на площині замикання і анкерах оберігає проникнення вологи всередину конструкції
- застосовується в місцях розташування деформаційних швів монолітних залізобетонних конструкцій
- в особливо важливих конструкціях доповнюється П-образної ремонтної гидрошпонкой серії ПО
- Поставляються в рулонах по 20 м. п.
Material: plasticized polyvinyl chloride (PVC-p)
Color: Blue
Packaging: rolls of 20 m.
Roll length deviation, m: no more than ± 0.5
Dimensional deviations: according to the technical specifications
Shore hardness, A: 70 ± 5
Density, g/cm3: ≈ 1.4
Tensile strength, MPa: ≥10 (DIN 53455)
Elongation at break,%: ≥ 275
Temperature resistance, °C: from -35 °C to 70 °C
Chemical resistance:
- from constant exposure to water and wastewater;
- from short-term exposure to low-concentration inorganic alkalis and acids, mineral oils.
UV resistance: not resistant
Service life: 25 years
Hydroshponka ND-R 500 - reliable sealing and protection of your structure. With this product, you can safely and effectively seal expansion joints between existing concrete and metal structures. It is ideal for monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals and much more. Advantages of hydroshponka ND-R 500: - reliable fixation using a metal strip and dowels for durability and stability. - The flexibility of the material makes it easy to install the hydroshponka in the desired position. - Thanks to the ribs on the locking plane and anchors, moisture will not be able to penetrate the structure, ensuring its reliable protection. - This product is ideal for expansion joints in monolithic reinforced concrete structures. - For particularly important structures, we recommend additionally using the PZ series U-shaped repair hydroshponka. - Sold in convenient rolls of 20 meters long. The ND-R 500 hydro-plug is your reliable partner for protecting the structure from the harmful effects of moisture and a guarantee of the durability and safety of your project.
Hydrostop ND - P 500 is an ideal solution for sealing expansion joints when connecting to concrete and metal structures. This product is necessary for the construction of buildings, foundations, underground parking lots, tunnels, canals and other objects. Our repair hydrostop is indispensable when performing monolithic works. It is easily fixed to the existing structure, and the free part of the hydrostop is securely attached to the reinforcing frame before pouring concrete. Made of plasticized polyvinyl chloride PVC-P, our hydrostops have excellent elasticity, which allows them to be precisely installed in the design position. Additional ribs on the surface and anchor provide reliable protection against moisture entering the structure. Being specially designed for reinforced concrete structures, our hydrostop effectively seals expansion joints. For particularly important works, it is recommended to combine it with a U-shaped repair hydrostop of the PO series. The product is supplied in rolls of 20 meters, ensuring convenience and economy in use. By choosing the ND-R 500 waterstop, you get a reliable and durable solution for waterproofing expansion joints. Do not doubt the quality of our products and join the customers who have trusted us for many years.
How to install a hydraulic wedge?
The hydraulic key is installed in the design position so that the middle of the hydraulic key is in the center of the intended seam.
Fastening is carried out directly to the formwork. Holes for fastening are allowed to be made only in the extreme zone of the hydraulic dowel, behind the extreme anchor. The fastening step is 200-300 mm, symmetrically on both sides. Additional fastening is also carried out to the reinforcing frame with a knitting wire. The dowel is connected by welding, by heating the ends of the dowel in a special conductor (for each dowel - an individual conductor) or using an industrial hair dryer or flat heating element. The soldering temperature is about 200 ° C (selected experimentally). To connect the dowels by the "cold" method, glue is used, for example, a one-component paste-like glue based on
silane-modified polymer Innoellast.
The ND-R 500 hydrostop is an ideal solution for sealing expansion joints when combined with concrete and metal structures. Our hydrostop is used in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals and much more. To ensure reliable fixation, we recommend using a metal strip, which is fixed on the outside of the hydrostop using dowels. The material of our hydrostop has high elasticity, which allows you to accurately install it in the desired position according to the project. Due to the presence of ribs on the locking plane and anchors, you can be sure that moisture will not be able to penetrate the structure. Our hydrostop is used in critical places where expansion joints of monolithic reinforced concrete structures are located. And if you need even greater reliability, we recommend supplementing the waterproofing with a U-shaped repair hydrostop of the PO series. Hydro-shponki ND-R 500 are available in rolls of 20 meters. Choose the hydro-shponki ND-R 500 and ensure reliable waterproofing of your structure!
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924