Torpoid membrane density of 400 g/m2, roll 1x20 m
Torpoid membrane density of 400 g/m2, roll 1x20 m
The 400 SNTDRAIN EKL spiked membrane has proven itself well in places where high compressive strength, impact strength and resistance to surface loads are required, for example, in deep multi-storey basements, garages, bridge basements, tunnel reinforcements, in individual projects of drainage and drainage systems for roads, bridges, railway embankments. Geomembranes protect the outer bitumen layer of insulation of foundations and engineering structures from possible mechanical damage during backfilling, and also protect the insulation during soil subsidence.
Field of application:
- foundations up to 2 meters deep
- basement and retaining walls
- as a concrete base
- paving
Vertical application:
- Remove dust and debris from the surface.
- Place the sheet on the surface so that the spikes are facing the wall.
- Secure the sheets to the wall along the top edge of the base using fasteners.
- The overlap of the sheets should be at least 20 centimeters.
- If necessary, the connection can be secured with hot air soldering or self-adhesive tape.
- Application temperature: from -5ºС to 30ºС
Horizontal application:
- Remove dust and debris from the ground.
- Place the sheet on the area with the spikes facing the ground.
- The sheets overlap each other by at least 30 centimeters.
- If necessary, the connection can be secured with hot air soldering or self-adhesive tape.
- Application temperature: from -5ºС to 30ºС
Storage conditions:
Store in a dry and cool place, in packaging that protects against ultraviolet radiation.
Rolls should be transported in an upright position or stacked on top of each other.
Pallets should be placed under the rolls and stored away from direct heat sources.
- Material — HDPE
- Weight — 400 g / sq m.
- Spikes height — 8 mm
- Thickness ≥ 0.3 mm
- Compressive strength 125 kN / m2 (±20%)
- Color — Black
- Operating temperature range from -30°C to 80°C
- Roll length - 20 m.
- Roll width - 1 m.
Resistant to chemicals and plant roots.
Not harmful to drinking water.
Resistant to acids, alkalis, oils and solvents.
Does not rot in the soil.
Country of manufacture — Turkey
- Material — HDPE
- Weight — 400 g / sq m.
- Spikes height — 8 mm
- Thickness ≥ 0.3 mm
- Compressive strength 125 kN / m2 (±20%)
- Color — Black
- Operating temperature range from -30°C to 80°C
- Roll length - 20 m.
- Roll width - 1 m.
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924