Product code:  0006 Producer: Arfen (Туреччина)

Vinyl panel for wall protection Arfen WG 204 mm wide, length 4 m.p., light gray color

1764 Product code:0006 Producer: Arfen (Туреччина)

Vinyl panel for wall protection Arfen WG 204 mm wide, length 4 m.p., light gray color

1764 uah / шт

+38 067 414 61 38
0 800-400-212

Arfen (Turkey) Impact and Scratch Wall Panel: Reinforce your interior with light gray WG 204mm wide and 4m long vinyl panels. p. It's not just protection, it's durability and style. Worn walls and scratches can quickly destroy the appearance of your interior. But with Arfen WG 204, the wall panels will become invulnerable to damage. Light gray color (color 41) adds freshness and brightness to your room, making it attractive and stylish. But this is not the only advantage of WG 204 panels. With a thickness of only 204 mm, these panels can be easily installed in narrow spaces where other panels cannot. Your interior will be protected from damage caused by the friction of chairs and other furniture items. But the feature of Arfen panels does not end only with wall protection. They can also serve as excellent door protection against damage. Never again face the problem of scratched doors and walls in public places. Install the panels on the doors and let them always remain new and clean, by installing these panels on the walls, you protect them from scratches, bumps and chips. Thanks to their dirt-repellent properties, the panels will repel dust and dirt, which will facilitate the process of caring for them and extend their service life. The advantage of Arfen WG 204 panels is not only in their functionality and style, but also in their compactness and affordable price. Compared to other wall breakers, the WG 204 model is one of the most compact and budget-friendly. Thus, you get not only excellent protection of your interior, but also save money. In addition, WG 204 panels can be supplemented with corner protection pads such as CG50B and cg76b. it will improve the protection of the corner walls and add a stylish accent to your interior.

The general advantages of Arfen WG 204 are:

  • High protection against shocks and scratches, which ensures the durability of your interior.
  • The narrow profile of the panels allows you to install them in narrow spaces.
  • Excellent protection of walls against the friction of chairs and other furniture items.
  • The possibility of using panels to protect doors and get rid of the problem of scratched doors in public places.
  • Dirt-repellent properties that ensure easy care of the panels and their long service life.
  • Compact and budget solutions for interior protection.
  • The possibility of installing corner protective overlays to improve protection and add a stylish accent.

Choose Arfen WG 204 , you get reliable, stylish and affordable protection of your interior from shocks and scratches. Protect your walls and doors with these vinyl panels and let your interior stay fresh and attractive for many years.

Installation of vinyl panels is relatively simple and may include the following steps:

  • Determine the installation height of the wall covering.
  • Wall preparation: removal of old facing materials, primer and leveling of the surface.
  • Measurements and Markings: Accurate measurements and markings for correct distribution of panels.
  • Trimming Panels: If you need to trim the bumper, use a hacksaw or utility knife and a metal ruler.
  • Make sure the wall is dry and clean.
  • Remove all unevenness of the wall for best results.
  • Fastening: panels can be fixed to the wall using glue, screws or special fasteners.
  • Before applying the glue, wipe both sides of the bumper to make sure the surfaces are free of dust and dirt.
  • Apply glue only to the surface of the wall, use a D2 or B3 spatula to spread the glue. It is recommended to use water-based contact adhesive (KIILTO EXTRA, DENLAKS TK-580). Consumption of 300-350 g of glue for every 1 m2.
  • Allow the glue to harden, under normal conditions it will take 10 to 15 minutes. However, the duration of hardening depends on temperature and humidity.
  • Important: Read the specification of the adhesive or other adhesives before starting application.
  • Place the baffle sheet on the wall, align and press it into place by hand.
  • Roll the bumper strip using a pressure roller. Start folding in the center of the sheet and move to the edges. After installation, remove excess glue.

Surface density - 120 ± 6 g/m2

Roll width - 200 cm

Breaking force along the length - not less than 2.8 kN / m

Breaking force in width - not less than 2.8 kN/m

Elongation at break in length - no more than 60%

Elongation at break in width - no more than 90%

Roll size: 2m x 50-100 sq. m (100-200 sq.m.)

Material: Polypropylene;

Density: from 100 to 200 g/sq.m;

Color: white.

Delivery methods:

  • Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
  • Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Pickup from the Protex warehouse — Free;
    (The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)

Payment methods:

  • Postpaid "Nova Poshta"
    The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order.
  • Payment by bank card (Privatbank 4246 0010 3027 1724)
    (Recipient: Fedchenko Svitlana Serhiivna)
  • Payment by details (PrivatBank)
    IBAN account: (UA103052990000026000005026855)
    Recipient: FOP Fedchenko Svitlana Serhiyivna,
    EDRPOU: 2745422924

Супутні товари