Arfen WG 145-1 bumper handrail with the possibility of installing LED lighting
Arfen WG 145-1 bumper handrail with the possibility of installing LED lighting
Handrail WG 145-1 with the possibility of installing LED lighting, bumper
Handrail guard WG 145-1 - the choice for medical centers and hospitals. And also has two functions as a handrail and a bumper. It has a spectacular appearance due to the configuration, both external transitional elements and internal ones, which allows you to mount the bumper around the perimeter of the room with one single tape, and this is an excellent design and functional solution.
Characteristics of the bumper
Base: aluminum profile
Profile length: 4 m
Height: 145 mm
Plugs, external and internal corners, accessories are additionally sold with this bumper.
Installation of the beater:
- Before installation, it is necessary to measure the required length of the aluminum bearing profile, then cut the required length.
- Mark and drill holes for installation in the aluminum bearing profile, with a diameter of 6-6.5 mm. Railings are fastened with dowels of the following types, which are not included in the delivery set:
brick base, dowel 10x60 (80), self-tapping screws 6x160;
concrete base, dowel 10x60, self-tapping screws 6x160;
plasterboard base, Molly dowels, bolts 6x140.
- At the next stage, it is necessary to drill holes in the wall using a perforator (at the rate of 2 brackets per 1 m/p, but no more than 600 mm between the brackets). For marking, use an aluminum carrier with already prepared mounting holes as a template.
- Complete the installation of the load-bearing aluminum profile, one by one, placing the brackets opposite the holes and fixing without tightening with self-tapping screws or bolts to the corresponding dowel.
- Cut the necessary length of the internal shock absorber and fix it in a special groove, which is located in the aluminum bearing profile.
- The final fixing with self-tapping screws (bolts) of the aluminum bearing profile is carried out after the installation of all transitional and final elements (plugs, corners).
- Installation of all transitional and final elements (plugs, corners) to the aluminum supporting profile is carried out using self-drilling screws 3.9x16 DIN 7504 N.
- After performing all the above-mentioned actions, it is necessary to make the final fixation of the aluminum profile with self-tapping screws (bolts) to the base of the wall, having previously placed it in the installation position.
- Cut to size and install decorative vinyl overlays and polycarbonate panels.
- For the length of straight sections over 4 m/p, the installation of the aluminum bearing profile and the vinyl decorative overlay must be done butt-to-butt and at intervals of min 100 mm.
Model | Profile length | Profile width | Profile thickness | Number of cushioning inserts | Plug left | The plug is right | Outer corner | Inner corner | Bracket | Polycarbonate insert | LED strip | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
WG 145-1 | 4 m | 145 mm | 85 mm | 1 | WG006 | WG006 | WG007-2 | WG007-1 | WG005 | + | - |
Delivery methods:
- Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
- Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
The cost of delivery is based on the carrier's tariffs - Pickup from the Protex warehouse — Free;
(The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)
Payment methods:
- Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order. - Payment by bank card (Privatbank 4246 0010 3027 1724)
(Recipient: Fedchenko Svitlana Serhiivna) - Payment by details (PrivatBank)
IBAN account: (UA103052990000026000005026855)
Recipient: FOP Fedchenko Svitlana Serhiyivna,
EDRPOU: 2745422924