PROPOOL 2K protective varnish

Protective color varnish for offices and residential premises

from 6 335,00
uah

bucket

from 6 335,00 uah

Wholesale price from 5 400,00 uah from 5 bucket

There will be a more favorable price offer for you. Please leave a request and our managers will make an individual calculation for you.

Svetlana Fedchenko

+38067 547 13 42

Description
Features

PROPOOL 2K protective varnish has excellent adhesion to surfaces such as concrete, metal, stone and wood. It can be easily applied in offices and residential areas, giving different colors, creating the desired decor.

Application:Industrial floors

Places of active pedestrian traffic
Places prone to active abrasion
Parking lots
Stadiums
Swimming pools
As a finishing protective layer for waterproofing coatings
On metal surfaces such as iron, steel and aluminum (metal processing plants, bridge decking, etc.)

Advantages:It has a flexible elastic structure

Resistant to constant water
UV resistant
High resistance to frost
Vapor permeable, allowing the surface to "breathe"
It has excellent adhesive properties
Resistant to chemicals
After drying, it does not contain toxic substances
It can be used as an independent protective coating
It is used for both indoor and outdoor work

PROPERTY (23ºC, rel. humidity 55%)	UNIT OF MEASUREMENTmethod	result	Colour
	--	white, grey
Mixing proportions: Comp.A : Comp.B	--	9:1
Viscosity	Spoise	ASTM D2196-86	300-500
Density of the mixture	gr/cm ^{3ASTM D1475/ DIN 53217/ ISO 2811}		1.05 ± 0.05
Dry residue	%	-	62 - 64
Open time	hours	-	1.5
Ignition temperature	ºC	ISO 3679 Method 1	28 ºC
Heat resistance	ºC	-	120ºC — long-lasting 140ºC — shock
Application temperature	ºC	-	5 ºC - 35 ºC
Resistance to pedestrian loads	hours	-	8 - 12
Drying time before clipping	hours	C679	1
Re-application time	hours	-	7
Adhesion to concrete	N/^{mm2ASTM D4541}		>2.5
UV resistance test	2000 hours	ASTM G154	passed

How to prepare the surface?

The humidity of the base should not exceed 5%. The applied surface must be dry and clean, without damage. Concrete and gypsum foundations must be thoroughly cleaned of oil, dirt, fuel waste and paraffin using suitable solvents. Damaged coatings, uneven surfaces and cracks should be repaired with suitable products. After the repair, the primer POLYPRIME AST102 is applied to the applied surface, and then the main layer of PROPOOL 2K COLOR is applied.

How to prepare the material?

Before applying, PROPOOL 2K COLOUR is mixed with a low-speed mixer for 2-3 minutes until smooth.

How to apply the material?

2K COLOUR varnish is applied using a combed spatula, roller, brush or airless spray device.
Please note that if the material is applied by an airless spray device, the pressure must be at least 150 bar.
Do not allow more than 24 hours between layers.
In case of exceeding the time of interlayer application (24 hours), the surface should be sanded.
If the material is applied using an airless spray device, the material should be diluted with a suitable solvent in the recommended proportions.
Place the material in a warm room 24 hours before application. Before applying, open the package and mix the material until smooth using a low-speed mixer.
The surface after application should be protected from rain, mechanical influences and other external influences until the material dries completely.
The time of interlayer application (usually 8-12 hours) can be increased in cold weather and reduced in hot weather.