Bitumen-rubber primer on Izoplast R solvent, 20 kg ADW

Instructions for use:

Mix before use. Apply the mass with a roofing brush or brush. Apply the next layer after the previous one has completely dried. Waiting time before laying the second layer of waterproofing compound Izoplast R is up to 6 hours. For waterproofing foundations and other underground parts of the building: apply 2-3 layers on a dry concrete surface, depending on the expected water load. To restore and arrange a seamless waterproofing coating of roofs: apply at least 2 layers of primer on the prepared base. To increase the service life of the finished coating, a mineral crumb must be applied to the fresh finishing layer of the emulsion.

Application Notes / Restrictions:

Store in tightly closed original packaging, inaccessible to children, protected from direct sunlight, from heat sources and open flames. It can be transported by any type of transport. Works with Izoplast R is carried out in windless weather without precipitation at ambient temperatures from 5 ° C to 25 ° C. When performing work, observe the safety rules when working with organic solvents, the use of effective ventilation and masks with an organic vapor absorber. In case of poisoning, provide the victim with fresh air, provide first aid, call a doctor.

Do not use Izoplast R inside residential and public buildings, as well as in other premises intended for permanent residence and finding people. The material must not come into direct contact with food or drinking water.
The product is flammable. Irritates eyes and skin. Vapours can cause feelings of drowsiness and dizziness. Do not inhale vapours. Avoid contact with skin and eyes. Use only in well-ventilated areas.