Water-based bitumen-rubber mastic Dysperbent, 20 kg ADW

Water-based bitumen-rubber mastic for waterproofing roofs and foundations, 20 kg


Izoplast Dysperbent is a water–based bitumen-rubber mastic modified with synthetic rubber.


Roof repair and maintenance
Waterproofing of foundations
For waterproofing residential and public buildings
Priming of mineral bases for proper insulation
Seamless waterproofing of vertical and horizontal surfaces


Water-soluble, without organic solvents
Resistant to weak acids and salts
For external and internal use
Ready for use, odorless
Very high adhesion to the substrate
It has thixotropic properties
Does not react with EPS and XPS polystyrene, can be used together with materials unstable to organic solvents and their vapors
Easy to apply with a brush, brush or spray method

Instructions for use:

Mix before use. The surface must be smooth, free of dust and dirt. Concrete, gypsum, ceramic, etc. surfaces should be primed with a solution of DYSPERBENT diluted with water in a ratio of 1:1. Do not store the diluted solution. To protect the waterproofing coating from mechanical damage in the underground parts of the building, use "Dysperbent" using a spiked membrane. Mix before use. Apply the mass with a roofing brush, brush or spatula at temperatures from 5 ° C to 25 ° C and in wet weather. The drying time of one coating layer at a temperature of 20 ° C is 6 hours. Depending on the need to apply the material in 2-3 layers. Apply each subsequent layer after the previous one has dried. It can be used on a slightly damp surface, then the drying time of the coating increases. The coating becomes waterproof only after complete curing.

Application Notes / Restrictions:

Observe the safety and health regulations during the work. Use protective gloves, clothing, glasses. In case of contact with the skin, rinse with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.

Related materials