Corner bumper Arfen CG 50B vinyl for protecting columns and walls, white

Corner bumper CG 50B Arfen

To protect columns, wall corners and protruding parts of buildings from damage and wear as a result of collision with moving objects, we offer special corner bumpers. They are produced by "ARFEN" company in several dozens of color options. This makes it possible to solve with the help of bumpers not only technical tasks, but also makes them an attractive decorative accessory. These elements are used to protect corners in public buildings with a constant high flow of people. This includes shops, hospitals, catering establishments, hotels, and administrative institutions.

Assembling:

• Determine the height of the corner bumper.
• If you need to trim the bumper, use a hacksaw or a construction knife and a metal ruler.
• Make sure the wall is dry and clean.
• Remove all wall irregularities for best results.
• Before applying the glue, wipe both sides of the bumper to make sure the surfaces are free of dust and dirt.
• Apply glue only to the surface of the wall, use a D2 or B3 spatula to spread the glue. It is recommended to use water-based contact adhesive (KIILTO EXTRA, DENLAKS TK-580). Consumption of 300-350 g of glue for every 1 m2.
• Allow the glue to harden, under normal conditions it will take 10 to 15 minutes. However, curing time depends on temperature and humidity.
• Important: Read the specification of the adhesive or other adhesives before starting application.
• Place the baffle sheet on the wall, align and press it into place by hand.
• Roll the bumper strip using a pressure roller. Start downloading in the center of the sheet and move to the edges. After installation, remove excess glue.

Characteristics:

• Note: This model does not come with any accessories.
• Size: 50x50 mm
• Profile length: 3 m

* the entire color palette consists of 32 colors and is available when ordering from 300 m.p. of each product unit