Elastic sealer designed for filling temperature-shrinkage joints
The sealing profile of 4.6 mm is an elastic material designed to fill the temperature-shrink seam, which is cut using a grinder or a seam cutter.
It is easy to install, the seam is filled immediately after cutting, and there is no need to wait for the concrete to reach the required humidity. At the same time, production time is reduced and costs are reduced, which makes the whole process of sealing the seam cheaper. Before installing the herringbone sealer, it is not necessary to clean the seam and process it with a primer. Compared to the sealant, the sealer can be easily replaced with a new one if necessary.
The 4.6mm wide Protex sealing profile is a new generation flexible material designed specifically for filling expansion joints. It is an excellent solution for all types of separation and expansion joints used in industrial and concrete floors. Our seals are made of extruded PVC, providing high elasticity and strength. They are an ideal alternative to mastics, allowing you to reduce costs and make the sealing process cheaper. The installation process has become much simpler - the joint is filled immediately after cutting, without the need to wait for the concrete to reach a certain moisture content. The advantages of using Protex sealant are not only its strength and elasticity, but also a significant reduction in installation time. You will no longer need to waste time cleaning the seam and applying primer before installing the herringbone seal. If it is necessary to change it, replacement is quick and easy. The product is available in convenient 200 meter rolls, giving you enough quantity for any project. The use of Protex sealant is a reliable and effective solution for your construction process.
Chemical resistance: resistant to alkaline solutions, acid solutions, detergents, animal and vegetable fats, steam cleaning
Protex Seam sealer 4.6 mm, 200 meter roll, is an innovative and elastic material that is designed specifically for filling temperature-shrinkable joints. Cutting a seam using a grinder or a seam cutter becomes an easy task due to the ease of installation of the seal. You will be able to fill the joint immediately after cutting, without having to wait until the concrete reaches the required moisture content. This unique solution significantly reduces production time and costs, making the entire seam sealing process cost-effective. You will not need to clean or prime the seam before installing the herringbone seal. If necessary, it can be easily replaced with a new one, unlike conventional sealants. Protex Joint Sealant is made from flexible extruded PVC and is designed for use in separation and expansion joints on floodplain industrial and concrete floors. It is an ideal alternative to mastics when sealing expansion and separation joints. This seal will allow you to significantly save time and effort during installation. You can purchase it in convenient 200 meter long rolls, providing enough material to complete projects of any size.
The attractive 4.6mm wide Protex seal offers you the ideal solution for filling expansion joints. This flexible material is easy to install and fills the joint immediately after it is cut, without requiring you to wait until the concrete reaches a certain moisture content. Thanks to this, production times are reduced and costs are reduced, making the seam sealing process more accessible. Installing a herringbone seal does not require pre-cleaning the seam or using a primer. In addition, the seal is easily replaced with a new one compared to sealant. Our sealant is made from flexible extruded PVC and is designed for use in separation and expansion joints on industrial and concrete floors. It is an excellent alternative to mastics for sealing expansion and separation joints. Sold in coils 200 meters long, our seal will allow you to significantly save time during installation.