Spiked membrane SNTDRAIN EKL 400, (roll 2X20) for foundation and drainage protection
To protect the outer bitumen insulation layer of foundations and engineering structures from possible mechanical damage
For use in construction, agriculture, landscape design, furniture industry
Needle-punched geotextile has a large elongation coefficient, easily takes the necessary shape and has excellent filtering abilities in the longitudinal and transverse directions.
The main functions of geotextile: Separation of adjacent layers of materials
Scope of application: Construction – in a flat roof system; for waterproofing as a reinforcing layer;
when paving the road; for drainage; foundation construction.
In landscape design – the creation of Alpine slides; arrangement of reservoirs; under the sidewalks; construction of sports grounds and football fields.
In the clothing and footwear industry – as a cushioning and strengthening material.
In the furniture industry – as a separating and protective material.
In agriculture – protection of plants from weeds, frost, sun, wind
Geotextile can be rolled out manually or with the help of special equipment, It depends on the width of the roll. Make sure that the laying takes place in an even layer without folds and twisting. Before laying the geotextile, it is necessary to carefully remove the rhizomes, stones and other debris, prepare the soil base, level the plot. When using several rolls, the geotextile is laid overlapping with the overlap of the adjacent canvas by 10-30 cm. This will help to avoid mixing of layers and displacement when filling bulk materials.
The use of needle-punched geotextile when laying paving slabs stabilizes the top layer of the soil, prevents the extrusion of sand and eliminates the cause of irregularities of the main pavement. For laying any paving slabs, geotextiles with a density of 120 to 200 g/m2 are used, depending on loads and traffic intensity. Geotextile is a necessary material for the arrangement of the territory. It is used in places exposed to high or frequent loads: driveways, parking lots, storage areas
Geotextile is made in the form of rolls, with a width of 2 to 6 m and a length of 50 to 150 m. The density can vary from 100 to 600 g/m2 in increments of 50 grams. The most popular density in the construction industry is 150-200 g/m2.
All geotextile fabrics pass water through themselves well, but each of the types has its own water permeability index. The water permeability of geotextiles is determined by the amount of liquid passing through the canvas in a given period of time and is measured in l/sec/m2. The higher the density of the geotextile, the less water permeability it has. Therefore, geotextile with a low density, from 80 to 200 g/m2, depending on the type of geotextile fabric, passes water better.
To protect the outer bitumen insulation layer of foundations and engineering structures from possible mechanical damage
For filling expansion joints in the construction of industrial floors
Additive for the manufacture of monolithic structures, the arrangement of underfloor heating and the manufacture of concrete products
Application in road construction, for filtration and drainage systems, for hydraulic structures
Material for noise index reduction, used in "floating floors" systems
THE GOODS ARE ON THE WAY
© "Protex-S" LLC2021 | Website created by MD Design