Hydraulic gasket P-1 for sealing and waterproofing of movable joints, bay 20 m, gray

Hydraulic gasket P-1 is an indispensable material for sealing and waterproofing movable joints in monolithic construction, underground and buried structures. Our water slide is ideal for use in hydraulic structures, including reservoirs, canals, dams and pools. It is also indispensable for waterproofing joints of foundations, tunnels, parking lots and other underground structures. Made of plasticized PVC-p polyvinyl chloride, our hydraulic gasket provides reliable sealing and protection against moisture penetration. Due to its U-shaped shape, the installation of the hydraulic shutter is easy and convenient using a special sheet of expanded polystyrene. Our hydraulic shutter copes well with high loads and withstands low water pressure from both the inside and outside. It is used in the locations of deformation joints of monolithic reinforced concrete structures and is complemented by an internal or lower external hydraulic gasket in particularly important structures. The P-1 hydroshonk is designed for all types of structures and is supplied in bays with a length of 20 meters. Allow us to ensure the reliability and durability of your construction project with our high-quality Protex P-1 hydraulic tamper.

The P-1 hydraulic gasket, available in bays of 20 m, is an ideal solution for sealing and waterproofing movable joints in monolithic construction of buried and underground structures. It is excellent for use in hydraulic structures such as reservoirs, canals, dams and pools, and also provides reliable waterproofing of joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. Our hydraulic shutter is made of plasticized PVC-p polyvinyl chloride. This guarantees its durability and reliability, as well as excellent waterproofing properties. The unique P-shape of the hydraulic shutter ensures easy and precise installation in the design position. You can use a sheet of styrofoam to then put a water slide on it, which provides additional fixation. The presence of ribs on the locking plane of the hydraulic shutter guarantees reliable prevention of moisture penetration into the structure. It is especially recommended for use in the locations of deformation joints of monolithic reinforced concrete structures. In the case of particularly important objects, the hydraulic shutter can be supplemented with an internal or lower external hydraulic shutter for additional protection. The P-1 hydraulic shutter withstands low water pressure both inside and outside, making it an ideal solution for various types of structures. Thanks to the convenient delivery in bays of 20 m each, our hydroshonk offers convenience and cost-effectiveness in use. Choose the P-1 hydraulic gasket and provide excellent waterproofing and durability to your construction projects!

How do I install a hydraulic shutter?

The hydraulic shutter is installed in the design position, so that the middle of the hydraulic shutter is located in the center of the intended seam.
The fastening is made directly to the formwork. Holes for fasteners are allowed to be made only in the extreme zone of the hydraulic gasket, behind the extreme anchor. The mounting pitch is 200-300 mm, symmetrically on both sides. Additional fastening is also performed to the reinforcing frame with knitting wire. The connection of the key is made by welding, by heating the ends of the key in a special conductor (for each key there is an individual conductor) or using an industrial hair dryer or a flat heating element. The temperature of the spike is about 200 ° C (selected experimentally). To connect the dowels by the "cold" method, glue is used, for example, a one-component paste-like glue based on
silane modified polymer Innoellast.

P-1 hydroshonk: powerful protection and reliable waterproofing for your construction project. Our P-1 hydraulic dowels are specially designed for sealing and waterproofing movable joints in buried and underground structures. You can be sure of their effectiveness and reliability. The use of hydraulic pads P-1 is suitable for various hydraulic structures, such as reservoirs, canals, dams, pools, and many others. They are also ideal for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. Made of plasticized PVC-P polyvinyl chloride, our hydraulic pads provide strength and durability that you can trust. The shape of the hydraulic shutter in the form of a "P" makes it easy to install it in the desired position, for example, using a sheet of expanded polystyrene. This ensures accurate and reliable installation in the design position. The presence of ribs on the locking plane provides reliable protection against moisture penetration into the structure. You can be sure that your building will be protected from moisture and potential damage. Hydroshpons P-1 should be used in the locations of deformation joints of monolithic reinforced concrete structures. They can also be supplemented with an internal or lower external hydraulic gasket for particularly important structures. Our P-1 hydraulic shutters are resistant to low water pressure both from the outside and from the inside. This provides additional security and protection for your design. Convenient provision in bays of 25 m.p. allows you to simply and easily use our P-1 hydraulic spar for any type of structures. Choose a P-1 hydraulic gasket and provide reliable waterproofing for your construction project.