Repair hydraulic gasket for expansion joints of the PO-2/50 series, 20 m bay

Repair hydraulic joint for expansion joints of the PO-2/50 series

624,00
uah
x
шт.
=
624,00 uah
624

Repair hydraulic shutters of the PO-2/50 series are used for waterproofing expansion joints when mating with existing concrete structures. It is used in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. The repair hydraulic shingle is fixed to the existing concrete structure, the free part of the hydraulic shingle is loosened to the reinforcing frame of the poured structure, immediately before pouring concrete

                                                           

They are made of plasticized PVC-p polyvinyl chloride

Repair hydraulic valves of the PO-2/50 series are designed to seal the expansion joints between the finished w/b structure and the poured structure. The absence of fastening anchors on one side of the hydraulic shutter allows you to hermetically glue the U-shaped hydraulic shutter to the finished w/b structure. For reliable fixation of the hydraulic rod, a metal strip is used, which is fixed from the inside of the hydraulic rod with dowels. The U-shaped shape allows you to clearly install the hydraulic gasket in the design position using an elastic sheet material, for example, a styrofoam plate, on which the hydraulic gasket is "put on". The presence of ribs on the locking plane prevents moisture from entering the structure.

  • it is used in the locations of deformation joints of monolithic reinforced concrete structures
  • in particularly important structures, it is complemented by an internal or external repair hydraulic gasket
  • they are supplied in bays of 20 m.p.
  • If necessary, elongation and to perform spatial nodal transitions are welded in a conductor, with a construction hair dryer, flat TEN-ohms or glued together
Материал Пластифицированный поливинилхлорид (ПВХ-п)
Цвет Серый
Упаковка Рулоны по 20 м.п.
Отклонение длины рулона, м, не более ± 0,5
Отклонение размеров Согласно КД
Твердость по Шору, А 70 ± 5
Плотность, г/см³ ≈ 1,4
Прочность при растяжении, МПа ≥10 (DIN 53455)
Удлинение при разрыве, % ≥ 275
Термостойкость, °С от -35°С до +70°С
Химическая стойкость - от постоянного воздействия воды и сточных вод;
- от кратковременного воздействия неорганических щелочей и кислот низкой концентрации, минеральных
Устойчивость к ультрафиолету Не устойчив
Срок эксплуатации не менее 25 лет
 

The Protex product is a hydraulic gasket PO-2/50 – the ideal solution for sealing expansion joints between existing concrete structures. This repair hydraulic shutter is suitable for use in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. The use of Protex Hydroshonks PO-2/50 is simple and effective. It is fixed to the existing concrete structure, and the free part of the hydraulic rod is securely loosened to the reinforcing frame before pouring concrete. Made of plasticized PVC-p polyvinyl chloride, the Protex PO-2/50 repair hydraulic gasket guarantees reliable sealing of expansion joints. The hydraulic shutters of the PO-2/50 series are equipped with a special U-shape, which allows you to accurately install the hydraulic shutter and use an elastic sheet material, such as a styrofoam plate, for gluing. The ribs on the locking plane prevent moisture from entering the structure. The Protex product Hydroshponk PO-2/50 is often used in the locations of deformation joints of monolithic reinforced concrete structures. It is an indispensable component of particularly important structures, which can be supplemented with an internal or external repair hydraulic gasket. The Protex Hydroshonk PO-2/50 is supplied in convenient bays with a length of 20 meters, which ensures ease of use and convenience during transportation. If necessary, elongation or to perform spatial nodal transitions, the hydraulic rods can be welded in a conductor, a construction hair dryer, a flat heating element or simply glued together. Protex Hydraulic gasket PO-2/50 is a reliable and effective solution for sealing expansion joints, which is easy to use and durable. Be confident in the quality and reliability of the Protex PO-2/50 product for your construction project.

We present the repair hydraulic shutters of the PO-2/50 series - a reliable and effective method of waterproofing expansion joints when connecting existing concrete structures. The ideal solution for monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals and more. Our hydraulic shutter is easily attached to an existing concrete structure, and the free part is securely attached to the reinforcement frame before pouring concrete. They are made of high-quality plasticized PVC-p polyvinyl chloride, which ensures the durability and reliability of our products. Our repair hydraulic valves of the PO-2/50 series are specially designed for sealing expansion joints between finished reinforced concrete structures and poured structures. Due to the absence of fastening anchors on one side of the hydraulic shutter, we ensure perfect tightness of gluing the U-shaped hydraulic shutter to the finished reinforced concrete structures. For even greater reliability, we offer a metal strip, which is fixed inside the hydraulic rod with dowels. The convenient U-shaped shape of our hydraulic shutter allows you to easily and accurately install it in the design position. You will need an elastic sheet material, for example, a styrofoam plate, on which a hydraulic gasket is "put on". In addition, the presence of ribs on the locking plane prevents moisture from entering the structure, ensuring perfect waterproofing. Our repair hydraulic valves of the PO-2/50 series are ideal for use in expansion joints of monolithic reinforced concrete structures. For particularly important structures, it is recommended to install an additional internal or external repair hydraulic damper. We offer our products in convenient bays with a length of 20 meters. If it is necessary to extend or perform spatial nodal transitions, our hydraulic dowels are easily welded in a conductor, with a construction hair dryer, flat tensioning or glued together. Do not miss the opportunity to use reliable and effective repair hydraulic shutters of the PO-2/50 series to protect your structures from the effects of water and moisture. Contact us today and get the highest quality product for your needs!

In front of you are the repair hydraulic shutters of the PO-2/50 series – an indispensable solution for sealing expansion joints between existing concrete structures. Our product is ideal for monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals and more. What makes our water cannon especially attractive? The possibility of fastening to an existing concrete structure and a reliable connection with the reinforcement frame of the poured structure. Thus, you can be sure of the reliability of sealing expansion joints. Our hydraulic shutters are made of plasticized polyvinyl chloride, providing optimal properties and durability. Please note that the PO-2/50 series hydroshpons are offered in a convenient form of coils containing 20 meters of sealant. If you need to lengthen the hydraulic gasket or create spatial nodal junctions, our products can be welded or glued using special equipment such as a conductor, a construction dryer or a flat heating element. Do not forget that in particularly important structures, we recommend using our internal or external repair hydraulic gasket for additional protection and reliability. If you are looking for a reliable and effective solution for waterproofing expansion joints, our PO-2/50 series hydraulic gasket is an absolute choice. Try it out today and see for yourself its high performance and durability.

Related materials