Repair hydraulic gasket for expansion joints PO-2, bay 20 m, gray

Product code: 0091

Repair hydraulic joint for expansion joints of the PO-2 series

520
uah
x
m.p.
=
520 uah
520

Repair hydraulic shutters of the PO-2 series are used for waterproofing expansion joints when mating with existing concrete structures. It is used in monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. The repair hydraulic shingle is fixed to the existing concrete structure, the free part of the hydraulic shingle is loosened to the reinforcing frame of the poured structure, immediately before pouring concrete

They are made of plasticized PVC-p polyvinyl chloride

Repair hydraulic valves of the PO-2 series are designed to seal the expansion joints between the finished w/b structure and the poured structure. The absence of fastening anchors on one side of the hydraulic shutter allows you to hermetically glue the U-shaped hydraulic shutter to the finished w/b structure. For reliable fixation of the hydraulic rod, a metal strip is used, which is fixed from the inside of the hydraulic rod with dowels. The U-shaped shape allows you to clearly install the hydraulic gasket in the design position using an elastic sheet material, for example, a styrofoam plate, on which the hydraulic gasket is "put on". The presence of ribs on the locking plane prevents moisture from entering the structure.

  • it is used in the locations of deformation joints of monolithic reinforced concrete structures
  • in particularly important structures, it is complemented by an internal or external repair hydraulic gasket
  • they are supplied in bays of 20 m.p.
  • If necessary, elongation and to perform spatial nodal transitions are welded in a conductor, with a construction hair dryer, flat TEN-ohms or glued together

The unique hydroshonk of the PO-2 series from Protex offers the ideal solution for sealing expansion joints between concrete structures. Made of flexible plasticized polyvinyl chloride, these repair hydraulic shutters will ensure moisture impermeability and protect structures from negative influences. The advantages of the PO-2 series hydroshonks are obvious. Due to the absence of fasteners on the one hand, this hydraulic gasket is easily and reliably glued to ready-made concrete structures. Internal dowels and a metal strip provide stability and fixation. Due to its U-shaped shape and the use of elastic material, the hydraulic shutter is easy to install and provides reliable protection. The fins on the locking surface prevent moisture from entering the structure, ensuring the durability and reliability of your project. Hydroshpons of the PO-2 series are used in important places where the deformation seams of reinforced concrete structures are located. If necessary, the products can be elongated or used to perform complex structural transitions thanks to special welding technology, construction hair dryers or gluing. Exclusively with high quality and durability, Protex's PO-2 repair hydraulic dowels are available in 20-meter-long bays, ready for installation and immediate use. Do not miss the opportunity to protect your structures from moisture and increase their reliability with the help of our innovative hydraulic shutters.

The excellent repair hydraulic gasket of the PO-2 series is an indispensable tool for ensuring reliable waterproofing of expansion joints in your construction project. Thanks to the use of high-quality materials such as plasticized polyvinyl chloride, our hydraulic shutters are durable and reliable. Our repair hydraulic valves of the PO-2 series are specially designed for hermetically sealing existing concrete structures with new elements. They do an excellent job of repairing buildings, foundations, underground parking lots, tunnels, canals and much more. These hydraulic dowels are easily fixed to the concrete base, and their free ends can be securely fixed to the reinforcement frame before pouring concrete. The main advantage of our hydraulic dowels is the absence of fastening anchors on one side, which makes it easy and hermetically to glue the hydraulic dowel to the finished reinforced concrete structure. To ensure even greater reliability and stability, we recommend the use of a metal strip and dowels inside the hydraulic gasket. With the help of the U-shape of our hydraulic shutters, you can easily and accurately install them in the design position, using a styrofoam plate as a support. Thanks to the ribs on the locking plane, you can be sure that the structure is protected from moisture. Our repair hydraulic dowels of the PO-2 series can be used in places of deformation joints of monolithic reinforced concrete structures, and in particularly important cases can be supplemented with an internal or external repair hydraulic dowel. We offer hydraulic spoons in bays with a length of 20 meters for your convenience. If you need to lengthen the hydraulic gasket or create spatial nodal junctions, you can weld using a conductor, a construction dryer, a flat heating element, or glue them together. Reliability, durability and ease of installation – this is what makes our PO-2 series repair hydraulic shutters the ideal choice to ensure the tightness and protection of your building structures. Take advantage of our water pumps right now!

The unique repair hydraulic gasket of the PO-2 series from Protex is a reliable and simple solution for sealing expansion joints between existing and new concrete structures. It is ideal for use in monolithic construction of buildings such as foundations, underground parking lots, tunnels, canals and more. Our hydraulic shutter is easily fixed to the existing concrete structure, and the free part of the hydraulic shutter is firmly connected to the reinforcement frame before pouring concrete. We manufacture it from high-quality materials such as plasticized PVC-P polyvinyl chloride to ensure durability and reliability of use. The advantages of our PO-2 series hydraulic spoons are undeniable. The absence of fastening anchors on one side allows it to be securely glued to the existing reinforced concrete structure. For additional fixation, we suggest using a metal strip, which can be fixed from the inside of the hydraulic rod using dowels. The U-shape provides easy installation in the design position using an elastic material, such as a styrofoam plate. Due to the presence of ribs on the locking plane, our hydraulic shutter protects the structure from moisture penetration. It can be used in various locations of deformation joints of monolithic reinforced concrete structures. In addition, for particularly important structures, we suggest using an additional internal or external repair hydraulic gasket for even greater reliability of protection against moisture penetration. Our hydraulic dowels are supplied in bays 20 meters long, which ensures ease of use. If it is necessary to lengthen or create spatial nodal junctions, they can be welded together using a conductor, a construction dryer, a flat TEN-a or they can simply be glued together. With the PO-2 series hydraulic gasket from Protex, your construction will be reliably protected from moisture penetration and will serve for many years without problems.

Related materials