Hydraulic gasket P-3 for sealing and waterproofing of movable joints P-3, bay 20 m, gray

Material :  Plasticized polyvinyl chloride (PVC-p)
Color : Grey
Packaging: Rolls of 20 m.p.
Roll length deviation, m,: no more than ± 0.5
Size Deviation : According to CD
Shore hardness, A : 70 ± 5
Density, g/cm3 : ≈ 1.4
Tensile strength, MPa : ≥10 (DIN 53455)
Elongation at break, % : ≥ 275
Temperature resistance, °C : from -35°C to 70°C
Chemical resistance : 

- from constant exposure to water and wastewater;
- from short-term exposure to inorganic alkalis and low concentration acids, mineral oils.

UV resistance : Not resistant
Service life : 25 years

Get used to impeccable sealing and reliable waterproofing with the Protex P-3 hydraulic gasket. This indispensable tool is used to fill movable joints in monolithic underground and buried structures, providing reliable protection. The Protex P-3 hydraulic gasket is ideal for hydraulic structures such as reservoirs, canals, dams and pools, and also provides reliable waterproofing of joints of foundations, foundations, tunnels and even multi-level parking lots. Made of plasticized PVC-p polyvinyl chloride, the hydraulic shutter has a unique shape, which facilitates its installation in the design position. Just put the key on a sheet of styrofoam and you're done! It is important to note that the Protex P-3 hydraulic shutter has ribs on the locking plane that prevent moisture from entering the structure. It is also used in the locations of deformation joints of monolithic reinforced concrete structures. If you are working with particularly important structures, it is recommended to supplement the Protex P-3 hydraulic head with an internal or lower external hydraulic head for maximum effect. Don't worry about the water pressure - the Protex P-3 hydroshonk can easily withstand it both inside and outside. It is a perfect solution for all kinds of designs, perfect for your project. The Protex P-3 hydroshonk is supplied in bays with a length of 25 meters, providing you with enough material to implement your tasks.

The P-3 hydraulic gasket is an excellent solution for sealing and waterproofing joints in the construction of underground and buried structures. It is indispensable for hydraulic engineering facilities such as reservoirs, dams and canals, as well as for waterproofing foundations, tunnels and parking lots. Made of plasticized PVC-p polyvinyl chloride. The unique U-shaped shape of the hydraulic shutter ensures a clear position in the project with the help of special tools. Advantages of the hydraulic shutter P-3: 1. The presence of ribs on the locking plane provides reliable protection against moisture penetration into the structure. Your building will be protected from the harmful effects of moisture and will retain its strength and durability. 2. Ideal for use in the locations of expansion joints of monolithic reinforced concrete structures. The P-3 hydraulic gasket guarantees reliable sealing and tightness of the seams, preventing leakage of water or other harmful substances. 3. For particularly important structures, it is recommended to use an internal or lower external hydraulic gasket. This allows you to provide perfect protection against moisture penetration from both inside and outside your building. 4. The P-3 hydraulic shutter withstands small water pressures both inside and outside, providing reliable waterproofing. You can be sure that your facility will be protected from unforeseen water problems. 5. Our P-3 hydraulic shutter is suitable for all types of structures. Regardless of the type or size of your project, you can be sure of the quality and reliability of our products. 6. The P-3 hydraulic dowels are supplied in bays with a length of 25 meters, which provides convenience and economic benefits when used. Do not risk your structures, choose a P-3 hydraulic gasket and ensure reliable waterproofing and tightness of the seams. Our products guarantee a high degree of protection and durability for your construction projects.

How do I install a hydraulic shutter?

The hydraulic shutter is installed in the design position, so that the middle of the hydraulic shutter is located in the center of the intended seam.
The fastening is made directly to the formwork. Holes for fasteners are allowed to be made only in the extreme zone of the hydraulic gasket, behind the extreme anchor. The mounting pitch is 200-300 mm, symmetrically on both sides. Additional fastening is also performed to the reinforcing frame with knitting wire. The connection of the key is made by welding, by heating the ends of the key in a special conductor (for each key there is an individual conductor) or using an industrial hair dryer or a flat heating element. The temperature of the spike is about 200 ° C (selected experimentally). To connect the dowels by the "cold" method, glue is used, for example, a one-component paste-like glue based on
silane modified polymer Innoellast.

P-3 hydroshonk: powerful protection and reliable waterproofing for your construction project. Our P-3 hydraulic dowels are specially designed for sealing and waterproofing movable joints in buried and underground structures. You can be sure of their effectiveness and reliability. The use of hydraulic pads P-3 is suitable for various hydraulic structures, such as reservoirs, canals, dams, pools, and many others. They are also ideal for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and other underground structures. Made of plasticized PVC-P polyvinyl chloride, our hydraulic pads provide strength and durability that you can trust. The shape of the hydraulic shutter in the form of a "P" makes it easy to install it in the desired position, for example, using a sheet of expanded polystyrene. This ensures accurate and reliable installation in the design position. The presence of ribs on the locking plane provides reliable protection against moisture penetration into the structure. You can be sure that your building will be protected from moisture and potential damage. Hydroshpons P-3 should be used in the locations of deformation joints of monolithic reinforced concrete structures. They can also be supplemented with an internal or lower external hydraulic gasket for particularly important structures. Our P-3 hydraulic shutters are resistant to low water pressure both from the outside and from the inside. This provides additional security and protection for your design. Convenient provision in bays of 25 m.p. allows you to simply and easily use our P-3 hydraulic spar for any type of structures. Choose a P-3 hydraulic gasket and provide reliable waterproofing for your construction project.