Hydraulic gasket internal hydraulic gasket for expansion joints VD 240, PVC, blue, bay 20 m

Hydraulic gasket VD 240, bay 20 m: Hydraulic gasket VD 240 from Protex is the ideal solution for sealing and waterproofing movable joints in the monolithic construction of various buildings, including foundations, underground parking lots, tunnels, canals and more. This innovative hydraulic gasket helps to securely embed into the concrete structure, providing long-lasting protection from moisture and penetration inside. The advantages of the VD 240 hydraulic shutter are simply indescribable. Its unique ribbed coating on the locking plane prevents moisture from entering the structure, ensuring the isolation and safety of your project. Due to the deformable area, the hydraulic shutter perceives deformations of reinforced concrete structures as efficiently as possible without breaking the tightness. This product is ideal for sealing between two concrete structures and can be used in particularly important projects with special tightness requirements. The use of an internal hydraulic gasket in such structures complements and enhances its effectiveness. Do not forget about the high strength of this hydraulic gasket. It withstands high water pressure, both inside and outside, ensuring reliable and durable waterproofing. Moreover, it is suitable for all types of structures, allowing it to be used in a wide variety of projects. The Protex VD 240 hydraulic shutter is available in rolls 20 meters long, providing ease of use. By purchasing this product, you get a high-quality sealing and waterproofing solution that will exceed your expectations.

We present to you a product that can easily cope with the sealing and waterproofing of movable joints - the hydraulic gasket VD 240 from Protex. Ideal for monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals and more. Due to its direct installation on the formwork sheet, it provides reliable hydraulic protection. The main advantages of the Protex VD 240 hydraulic damper:

1. The presence of ribs on the locking plane prevents moisture from entering the structure, ensuring its durability and reliability.

2. The deformable section allows the hydraulic gasket to perceive deformations of reinforced concrete structures without breaking the tightness, ensuring the stability of the entire structure.

3. Ideal for sealing between two concrete structures, providing effective waterproofing.

4. In the case of particularly important structures, the hydraulic shutter is complemented by an internal hydraulic shutter, providing additional protection.

5. Can be used in structures with special requirements to ensure perfect tightness - no water will penetrate!

6. Withstands high water pressure both outside and inside, providing complete protection from moisture.

7. Suitable for all kinds of designs, allowing it to be used in different projects.

8. The Protex VD 240 hydraulic shutter is supplied in rolls with a length of 20 meters, which provides convenience and savings during installation.

Do not miss the opportunity to use a reliable and effective tool for waterproofing and sealing.

Choose the VD 240 hydraulic gasket from Protex and trust the proven quality.

How do I install a hydraulic shutter?

The hydraulic shutter is installed in the design position, so that the middle of the hydraulic shutter is located in the center of the intended seam.
The fastening is made directly to the formwork. Holes for fasteners are allowed to be made only in the extreme zone of the hydraulic gasket, behind the extreme anchor. The mounting pitch is 200-300 mm, symmetrically on both sides. Additional fastening is also performed to the reinforcing frame with knitting wire. The connection of the key is made by welding, by heating the ends of the key in a special conductor (for each key there is an individual conductor) or using an industrial hair dryer or a flat heating element. The temperature of the spike is about 200 ° C (selected experimentally). To connect the dowels by the "cold" method, glue is used, for example, a one-component paste-like glue based on
silane modified polymer Innoellast.

The VD 240 hydraulic gasket is an ideal choice for reliable sealing and waterproofing of movable joints in monolithic construction. It is used in all types of structures, including foundations, underground parking lots, tunnels, canals and more. With special attention to detail, the hydraulic shutter is mounted directly on the formwork sheets, which ensures impermeability to moisture and protection of the concrete structure. The unique advantage of the VD 240 hydraulic shutter is the presence of ribs on the locking plane, which eliminates the possibility of moisture penetration into the structure. At the same time, the deformable section of the hydraulic gasket allows you to reliably perceive deformations of reinforced concrete structures without breaking the tightness. Our hydraulic gasket can also be used in hydraulic structures, including reservoirs, canals, dams, pools and other facilities, as well as for waterproofing joints of foundations, foundations, tunnels, multi-level parking lots and underground structures. We manufacture a hydraulic gasket made of plasticized PVC-p polyvinyl chloride, which guarantees high strength and durability of the material. Our hydraulic shutter is capable of withstanding high water pressures, both inside and outside the structure. In the case of particularly important objects, we recommend using an internal hydraulic gasket for additional tightness. The product is supplied in convenient rolls with a length of 20 meters, which ensures convenience and cost-effectiveness during installation. Choose the VD 240 hydraulic gasket for reliable and effective waterproofing in all conditions and requirements!