Hydroshponka PO-2/50

Repair hydraulic joint for expansion joints of the PO-2/50 series

from 624
from 624 UAH
Wholesale price from 620 UAH from 200 шт.

There will be a more favorable price offer for you. Please leave a request and our managers will make an individual calculation for you.


Repair hydroshpons of the PO-2/50 series are used for waterproofing expansion joints when mating with existing concrete structures. It is used in the monolithic construction of buildings, including foundations, underground parking lots, tunnels, canals, etc. The repair hydraulic shingle is fixed to the existing concrete structure, the free part of the hydraulic shingle is loosened to the reinforcement frame of the poured structure, immediately before pouring concrete


They are made of thermoplastic elastomer TRE or plasticized PVC-p polyvinyl chloride

The PO-2/50 series repair hydraulic shutters are designed to seal the expansion joints between the finished w/b structure and the poured structure. The absence of fastening anchors on one side of the hydraulic shroud, allow you to hermetically glue the U-shaped hydraulic shroud to the finished w / b structure. For reliable fixation of the hydraulic pin, a metal strip is used, which is fixed from the inside of the hydraulic pin with dowels. The U-shaped shape makes it possible to clearly install the hydroshaper in the design position using an elastic sheet material, for example, a styrofoam plate, on which the hydroshaper is "put on". The presence of ribs on the locking plane prevents the penetration of moisture into the structure.

  • it is used in the locations of deformation joints of monolithic reinforced concrete structures
  • in particularly important structures, it is supplemented with an internal or external repair hydraulic shponka
  • they are delivered in bays of 25 m.p.
  • If necessary, elongation and for performing spatial nodal transitions are welded in a conductor, with a construction hairdryer, flat TEN-om or glued together

Related materials