Product code:  0303 Producer: Inovgreen (Польща)

Airport grid IR 35 black 39x39x3.5 cm (0.1512m2)

145 Product code:0303 Producer: Inovgreen (Польща)

Airport grid IR 35 black 39x39x3.5 cm (0.1512m2)

Inovgreen IR35 Grating - Inovgreen IR35 Airfield Grating is a product designed to reinforce the grass surfaces of airfields such as runways, turning areas, helipads and others. Thanks to the use of IR35 airfield eco-lattice, a smooth and stable base is obtained, which eliminates ruts and improves traction when landing, while shortening the braking distance. The product is designed to be pressed into the soil.

145 uah / шт

+38 067 414 61 38
0 800-400-212

Inovgreen IR35 geogrids

Features:
  • The size of the geogrid: 39 cm x 39 cm, height 3.5 cm

  • Grid weight: 1.08 kg = 7.16 kg/m2

  • Temperature resistance: from -30°С to +80°С

  • Installation method: using built-in hooks (without tools)

  • Impact on the environment: harmless

  • Biologically active surface: 50%

  • Load resistance: up to 1000 t/m2 with filling (ITB test report)

  • Certificates: TÜV Nord ISO 9001:2015

  • High Grip non-slip surface. Quick Pick double fastening system.

Application
  • construction of airstrips and helicopter pads
  • gravel parking lots
  • grass parking lots
  • camping sites
  • strengthening of temporary access roads
  • access to construction sites
  • shooting ranges
  • entrances to garages
  • garden paths
  • outbuildings - drainage
  • recreational areas
  • strengthening existing lawns
  • preparation of sites for mass events
  • military training grounds

Assembling

Stage 1. Soil preparation

After removing the top layer of soil, we fill the building site with a well-drained gravel or crushed stone mixture, compact everything. For better stabilization of this layer, the surface can be pre-lined with construction non-woven material or geotextile. The bearing layer should have a thickness of 20 cm, in case of preparation of the site for a road surface for passenger cars, and up to 50 cm for a road surface for trucks.

Stage 2. Leveling layer

Level the surface of the previously prepared bearing layer with geotextile to ensure the separation of the layers. Then cover the area with gravel or a mixture of sand and gravel. The leveling layer should be 2-3 cm thick.

Stage 3. Laying the grids

  • INOVGREEN Park (IP) grids are laid starting from the corner of the building site, leaving a compensator 2-5 cm from the edge. We lay the first lattices with the "women's" hooks facing outwards. Then we add more lattices and, pressing with our feet, connect the protrusions. Continue stacking while standing on the already placed grids. Stabilize the surface with a vibrator or roller.

Stage 4. Filling

  • Aggregate: Fill the grids with gravel or other aggregate. It is recommended to fill the aggregate 1-2 cm above the grid surface.
  • Grass: Fill the trellis with soil, a mixture of peat and sand, or other material suitable for grass. For best results, mix the grass seed with the substrate before filling the grid. The grass must take root well before making the project area accessible to traffic.

NON-STANDARD METHODS OF SUBSTRATE PREPARATION

In special cases, when intensive use of the area covered with nets is not expected, a simplified method of land preparation can be used.
1. Remove vegetation and topsoil approximately 7 cm thick (depending on surface type).
2. If desired, cover the surface with construction fabric.
3. Pour an even layer of gravel-sand mixture with a thickness of at least 3 cm and lightly tamp it. Then the surface is lined with nets and filled as intended.

 

ALTERNATIVE TO USING INOVGREEN PARK IP GRIDS

If there is a need to quickly stabilize the green area and heavy traffic is not expected, you can use the fast and efficient method of laying INOVGREEN IP grids.
1. Turn over the panel of four pre-connected IP grids "leaves".
2. Place the first panel, pressing it slightly against the lawn. Then we add and connect by pressing another panel of lattices, turned in the same way.
3. If necessary, the grid can be easily cut into the desired shape.

Advantages

EASY INSTALLATION

The light weight of INOVGREEN products makes it easy to transport and install the parking and lawn grill. The assembly is simple and fast, the grids are connected using clips. Easy processing with a circular saw or angle cutter is possible. This allows for effective and efficient gardening.

ECOLOGY

INOVGREEN soil stabilization perfectly corresponds to modern trends in ecological land use. INOVGREEN nets are completely neutral to the environment, and the surfaces lined with them are suitable for landscaping.

WATER PERMEABILITY

The surface lined with INOVGREEN grids guarantees excellent water permeability of rainwater and melted snow into the soil. The surface lined with grids does not require drainage, which significantly reduces investment and subsequent operating costs.

STRENGTH

INOVGREEN grids have high operational strength. When filled with crushed stone, gravel, earth or other similar material, they have a laboratory-confirmed durability of up to 1,000 tons/m2.

ECONOMIC BENEFITS

The Inovgreen lattice installation system is simple and fast, does not require a lot of labor (1 person can lay up to 100m2 within 1 hour). The cost of soil preparation is much lower than for concrete coatings. Using the Inovgreen system, we avoid the fees associated with draining stormwater into the sewer.

100% RECYCLING

The granules used in the production of INOVGREEN grids are made from 100% recycled plastic. Raw materials for production are certified for the absence of contamination by heavy metals or other substances harmful to health and the environment.

HIGH QUALITY

Inovgreen products are manufactured in accordance with international standards ISO 9001: 2015. INOVGREEN gratings are produced from Polish raw materials of the highest quality from certified manufacturers. The high quality of the material used in production guarantees exceptional strength and flexibility of INOVGREEN grids.

Packaging

1 layer: 6 units = 0.9075 m²

low palette : 59 layers
dimensions: 120 cm x 80 cm, height 220 cm
number of meters per pallet: 53.54 m2

high pallet : 70 layers
dimensions: 120 cm x 80 cm, height 260 cm
number of meters per pallet: 63.53 m²

Delivery methods:

  • Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
  • Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Pickup from the Protex warehouse — Free;
    (The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)

Payment methods:

  • Postpaid "Nova Poshta"
    The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order.
  • Payment by bank card (Privatbank 4246 0010 3027 1724)
    (Recipient: Fedchenko Svitlana Serhiivna)
  • Payment by details (PrivatBank)
    IBAN account: (UA103052990000026000005026855)
    Recipient: FOP Fedchenko Svitlana Serhiyivna,
    EDRPOU: 2745422924