Producer: ADW (Польща)

Water-based bitumen emulsion ADW Izoplast R-W, 10 l

759 Producer: ADW (Польща)

Water-based bitumen emulsion ADW Izoplast R-W, 10 l

Bitumen emulsion is intended for priming the surface and performing light water-based waterproofing, 10 l

759 uah / шт

+38 067 414 61 38
0 800-400-212

Bitumen anionic emulsion Izoplast R-W is designed for priming the surface and performing "light" waterproofing before laying rolled and liquid waterproofing materials (Izoplast B-W, Izoplast 2K-W) on any mineral surfaces, as well as for protecting wooden elements.

Advantages of the material:

Ready for use
Does not contain solvents
Can be applied to dry and wet surfaces
Dries quickly
Penetrates deeply into the base
Enhances the adhesion of the base to insulating materials
Protects the base from the effects of weather conditions
Protects the bases from the effects of chemicals and salts
It can be used in contact with expanded polystyrene, mineral wool and wood

Application areas:

To create moisture- and water-proof insulation coatings on vertical and horizontal concrete surfaces
In private construction and in large-scale infrastructure facilities
To protect wooden products and elements (poles, fences) from moisture
To create a thin layer of waterproofing

Composition: Water-based bitumen emulsion
Color: Black
Packaging: 20 l bucket
Time of complete drying: 10 days
Time between coats: 6:00
Consumption (priming and first layer) 0.2 - 0.5 l/m2
Consumption (subsequent layers): 0.15 - 0.35 l/m²
Application temperature: from +5°С to +30°С

Surface preparation:

To create a reliable insulating coating, the surface must be smooth, without bumps, depressions and cracks. If there are voids and/or cracks on the surface, they must be repaired with appropriate repair compounds.

Before applying the material, the surface must be cleaned of dirt, dust, oils and other substances that interfere with adhesion. It is necessary to use Izoplast R-W on fresh concrete surfaces after the end of the concrete drying period.

Preparation of the material:

Mix the material thoroughly before use.
To be used as a primer, Izoplast R-W must be diluted with clean water in a ratio of 1:1.

Application of the material:

IZOPLAST R-W is applied with a roofing brush or a brush with stiff bristles. Each next layer must be applied after the previous one has completely dried. The drying time depends on the temperature and humidity of the environment and the substrate (up to 6 hours).

Recommendations for use, storage and transportation:

Store and transport at a temperature not lower than 5°C.
The tool after use with IZOPLAST R-W should be washed with water immediately after use, after drying it can only be cleaned mechanically.

Delivery methods:

  • Delivery by courier in Kyiv (1-3 working days, cost according to the carrier's tariffs);
  • Address delivery by Nova Poshta Courier (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Nova Poshta in Ukraine (1-3 working days, cost according to the carrier's tariffs);
    The cost of delivery is based on the carrier's tariffs
  • Pickup from the Protex warehouse — Free;
    (The address of the warehouse: Kyiv, 9 Pshenychna Street. The goods can be received from 9:00 a.m. to 5:00 p.m., from Monday to Friday.)

Payment methods:

  • Postpaid "Nova Poshta"
    The buyer-recipient of the parcel pays a commission of 2% + UAH 20 from the amount of the order.
  • Payment by bank card (Privatbank 4246 0010 3027 1724)
    (Recipient: Fedchenko Svitlana Serhiivna)
  • Payment by details (PrivatBank)
    IBAN account: (UA103052990000026000005026855)
    Recipient: FOP Fedchenko Svitlana Serhiyivna,
    EDRPOU: 2745422924

Супутні товари