What is a membrane-forming device?The membrane–forming agent is a high-quality material for concrete surfaces based on acrylic emulsion, which is designed to protect freshly laid concrete and prevent moisture evaporation.
Due to the formation of a film on the surface, moisture is retained in the concrete layer, which positively affects the strength set of concrete, reduces the risk of shrinkage cracks.
How to protect concrete in the summer?When laying concrete in hot weather, it must be protected from weathering, high temperature to prevent rapid loss of moisture.
The Teknokur 100 membrane-forming agent retains the moisture necessary for the hydration of cement in the concrete mortar, prevents uneven drying and the formation of shrinkage cracks in the concrete body and on its surface, eliminates the formation of dust on the hardened surface.
How to use the Teknokur 100 membrane generator?Teknokur 100 is ready to use.
It is applied to freshly laid concrete using a sprayer, brush or roller in two layers with an interval of 6 hours, creating a durable, wear-resistant and dust-free surface.
What are the advantages of using a membrane-forming device?effectively retains moisture necessary for the hydration of cement in concrete reduces the likelihood of shrinkage cracks in concrete improves the mechanical strength of concrete does not contain solvents, can be used inside the premises, both cement and polymer coatings can be applied, easy to use, significantly reduces labor costs Is it necessary to prepare the surface before applying a membrane-forming agent?
Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent adhesion.
Mix the material well before use.
What are the features of the application of the membrane-forming agent?In hot weather (above 300 C), store Teknokur 100 in a cool place before use.
- at low temperatures (below 50 C), this product can thicken, while its ability to spray is reduced.
- when applying with a spray gun, make sure that the base is evenly coated.
- when applied with a roller, apply evenly in a thin layer, preventing the formation of puddles.
- Before applying any other coating, the Teknokur 100 material is subject to mechanical separation.
